HIGH TEMPERATURE OXIDATION OF Fe3Al COATING PREPARED BY HIGH ENERGY MICRO-ARC ALLOYING PROCESS

J Chin Soc Corr Pro

2009, Vol. 29

Issue (6): 431-436 DOI:

技术报告

Current Issue | Archive | Adv Search

HIGH TEMPERATURE OXIDATION OF Fe₃Al COATING PREPARED BY HIGH ENERGY MICRO-ARC ALLOYING PROCESS

GUO Pingyi; SHAO Yong; LI Lei

Jiangsu Provincial Key Laboratory of Advanced Welding Technology; Jiangsu University of Science and Technology; Jiangsu 212003

Download:

PDF(2443KB)
Export: BibTeX | EndNote (RIS)

Abstract

High energy micro-arc alloying process was successfully used to prepare compact microcrystalline Fe₃Al coating with a metallurgical bonding between the coating and the substrate alloy, when keeping all the parameters such as power, frequency, and time proper. Moreover, the preparation process is accompanied with a minimal thermal distortion or microstructural changes of the substrate. Air oxidation experiments at 900 ℃\linebreak and 1000 ℃ indicated that the Fe₃Al coating exhibited better oxidation resistance than the cast Fe₃Al, forming continuous and compact Al-rich scales with good adhesion. This may be due to the fact that the microcrystallization of Fe₃Al enhances short-circuit diffusion paths and reduces the critical Al content for the formation of a continuous Al₂O₃ scale.

Key words: High energy micro-arc alloying process Fe3Al coating High Temperature oxidation

Received: 10 September 2008

ZTFLH:

TG174.4

Corresponding Authors: GUO Pingyi E-mail: pingyguo@gmail.com

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	GUO Beng-Xi

Cite this article:

GUO Pingyi SHAO Yong LI Lei. HIGH TEMPERATURE OXIDATION OF Fe₃Al COATING PREPARED BY HIGH ENERGY MICRO-ARC ALLOYING PROCESS. J Chin Soc Corr Pro, 2009, 29(6): 431-436.

URL:

https://www.jcscp.org/EN/ OR https://www.jcscp.org/EN/Y2009/V29/I6/431

[1] Pedraza F, Grosseau-Poussard J L, Dinhut J F. Evolution of oxide scales on an ODS Fe-Al intermetallic alloy during high temperature exposure in air [J]. Intermetallics, 2005, 13: 27-33
[2] Godlewska E, Szczepanik S, Mania R, et al. Fe-Al materials from intermetallic powders [J]. Intermetallics, 2003, 11: 307-312
[3] Szczucka-Lasota B, Formanek B, Hernas A. Growth of corrosion products on thermally sprayed coatings with Fe-Al intermetallic phases in aggressive environments [J]. J. Mater. Proc. Technol., 2005,164-165: 930-934
[4] Montealegre M A, Gonzalez-Carrasco J L, Morris-Munoz M A, et al. The high temperature oxidation behavior of ODS Fe-Al alloy [J]. Intermetallics, 2008: 439-446
[5] Niu Y, Hou Y.Characterization of pore development at\linebreak Al₂O₃/Fe-Al interface during high temperature oxidation [J]. Acta Metall. Sin., 2003,39(10): 1065-1070
(牛焱，侯嫣，高温氧化时Al₂O₃/Fe-Al界面孔洞形成过程的分析[J]，金属学报，2003，39（10）：1065-1070)
[6] Levashov E A, Vakaev P V, Zamulaeva E I, et al. Nanoparticle dispersion-strengthened coatings and electrode materials for electrospark deposition [J].Thin Solid Films, 2006, 515, 1161-1165
[7] Frangini S, Masci A.Intermetallic Fe-Al based coatings deposited by the electrospark technique: corrosion behavior in molten (Li+K) carbonate [J].Surf. Coat. Technol., 2004, 184: 31-39
[8] Zheng W L, Gao W, Michiko Yoshihara, et al. Improving oxidation resistance of Ti₃Al and TiAl intermetallic compounds with electro-spark deposit coatings [J]. Mater. Sci. Eng., 2003, A347: 243-252
[9] Zhang Z G, Niu Y. Effect of Chromium on the oxidation of a Fe-10Al alloy at 1000 ℃ [J]. Mater. Sci. Forum, 2005,475-479: 685-688
[10] Boggs W E. The oxidation of iron-aluminum alloys from 450 ℃ to 900 ℃ [J]. J. Electrochem. Soc., 1971,118(6): 906-913
[11] Saegusa F, Lee L. Oxidation of iron-aluminum alloys in the ranges 500-1000 ℃ [J]. Corrosion, 1966, 22: 168-177
[12] Lou H Y, Wang F H, Xia B J, et al. High temperature oxidation resistance of sputtered micro-grain superalloy K38G [J]. Oxid.Met., 1992, 38(3/4): 299-307
[13] Gesmundo F, Niu Y, Viani F. The transition from the formation of mixed scales to the selective oxidation of the most reactive component in the corrosion of single and two-phase binary alloys [J]. Oxid. Met., 1993, 40: 373-393

[1]	XIE Dongbai, HONG Hao, WANG Wen, PENG Xiao, DUO Shuwang. Oxidation Behavior of Stainless Steel 1Cr11Ni2W2MoV in a Simulated Kerosene Combustion Environment[J]. 中国腐蚀与防护学报, 2020, 40(4): 358-366.
[2]	XU Xunhu,HE Cuiqun,XIANG Junhuai,WANG Ling,ZHANG Honghua,ZHENG Xiaodong. High Temperature Oxidation Behavior of Co-20Re-25Cr-1Si Alloy in 0.1 MPa Pure Oxygen[J]. 中国腐蚀与防护学报, 2020, 40(1): 75-80.
[3]	AI Peng,LIU Lixiang,LI Xiaogang,JIANG Wentao. Influence of TiAlSiN Coatings on High Temperature Oxidation Resistance of γ-TiAl Based Alloys[J]. 中国腐蚀与防护学报, 2019, 39(4): 306-312.
[4]	Junjie XIA,Hongzhi NIU,Min LIU,Huazhen CAO,Guoqu ZHENG,Liankui WU. Enhancement of High Temperature Oxidation Resistance of Ti48Al5Nb Alloy via Anodic Anodization in NH₄F Containing Ethylene Glycol[J]. 中国腐蚀与防护学报, 2019, 39(2): 96-105.
[5]	Dongbai XIE,Youyu ZHOU,Jintao LU,Wen WANG,Shenglong ZHU,Fuhui WANG. Effect of Al/Si Content on Corrosion of Ni-based Alloys in Supercritical Water[J]. 中国腐蚀与防护学报, 2019, 39(1): 68-76.
[6]	Ling WANG,Junhuai XIANG,Honghua ZHANG,Songlin QIN. High Temperature Oxidation Behavior of Three Co-20Re-xCr Alloys in 3.04×10^-5 Pa Oxygen at 1000 and 1100 ℃[J]. 中国腐蚀与防护学报, 2019, 39(1): 83-88.
[7]	Dongbai XIE, Youyu ZHOU, Jintao LU, Wen WANG, Shenglong ZHU, Fuhui WANG. Effect of Cr Content on Oxidation of Ni-based Alloy in Supercritical Water[J]. 中国腐蚀与防护学报, 2018, 38(4): 358-364.
[8]	Yue LI, Jian WANG, Yong ZHANG, Jingang BAI, Yadi HU, Yongfeng QIAO, Caili ZHANG, Peide HAN. Analysis of Initial Oxidation Process of 2205 Duplex Stainless Steel in Closed Container at High Temperature[J]. 中国腐蚀与防护学报, 2018, 38(3): 296-302.
[9]	Zhan ZHAO,Jingyang LI,Jianxin DONG,Zhihao YAO,Maicang ZHANG. Oxidation Behavior during High Temperature Homo-genization Treatment of Cast Ni-Fe Based Corrosion Resistant 925 Alloy[J]. 中国腐蚀与防护学报, 2017, 37(1): 1-8.
[10]	Dongbai XIE,Guo SHAN. Rapid Identification of Liquid Accelerant in Fire Scene Environment[J]. 中国腐蚀与防护学报, 2017, 37(1): 74-80.
[11]	Tiantian YANG,Jingjun XU,Yuhai QIAN,Meishuan LI. Preparation and Ultra-high Temperature Oxidation Resistance of Micro-laminated ZrC/MoSi₂ Coating on Siliconized Graphite[J]. 中国腐蚀与防护学报, 2016, 36(5): 476-482.
[12]	Jiapeng HUANG,Bin YANG,Hang WANG. Effect of Multiple Addition of Y, La and Ce on Oxidation Behavior of Ni-10Cr-5Al Alloy at 1000 ℃ in Air[J]. 中国腐蚀与防护学报, 2016, 36(5): 489-496.
[13]	YUAN Juntao, WANG Wen, ZHU Shenglong, WANG Fuhui. Oxidation Behavior of Super 304H Steel in Steam at 700~900 ℃[J]. 中国腐蚀与防护学报, 2014, 34(3): 218-224.
[14]	YUAN Juntao,WU Ximao,WANG Wen,ZHU Shenglong,WANG Fuhui. Effect of Grain Size on Oxidation of Heat-resistant Steels in High Temperature Water Steam[J]. 中国腐蚀与防护学报, 2013, 33(4): 257-264.
[15]	FU Guangyan, YANG Ningning, WANG Yanyan. AIR OXIDATION OF Fe-Y ALLOYS AT 800℃[J]. 中国腐蚀与防护学报, 2010, 30(6): 453-456.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed