Please wait a minute...
J Chin Soc Corr Pro  2004, Vol. 24 Issue (4): 222-225     DOI:
Research Report Current Issue | Archive | Adv Search |
The Action of the Forms of P Element on the Process of the Microarc Oxidation
Jianzhong Li
东北大学材料与冶金学院冶金物理化学研究所
Download:  PDF(144KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Under the same conditions, the Al-Mg alloys surface treatment was performed by the microarc oxidation with different components of electrolytes. The thickness of the microarc oxidation coating was measured by the thickness gauge. Surface morphology and composition of the coating were analyzed by scanning electron microscopy(SEM) coupling with energy dispersive X-ray(EDS); the adhesion between the oxidation coating and the substrate was evaluated by means of the file. The results showed that the high stoichiometry of the phosphorus element increased the growth rte and the compactness of the oxidation coating, decreased its porosity, boosted up the adhesion between the oxidation coating and the substrate, and influenced the composition of the microarc oxidation coating. At the same time, the molecule polymerization state had an effect on the growth rate and the porosity of the coating, on which the linear polymer had a more useful impact than the cyclic polymer did.
Key words:  microarc oxidation      the forms of elements      Al-Mg alloys      stoichiometry      molecule structure      
Received:  24 November 2003     
ZTFLH:  TG146.21  
Corresponding Authors:  Jianzhong Li   

Cite this article: 

Jianzhong Li. The Action of the Forms of P Element on the Process of the Microarc Oxidation. J Chin Soc Corr Pro, 2004, 24(4): 222-225 .

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y2004/V24/I4/222

[1]ButyaginPI,KhokhryakovYeV ,MamaevAI.Microplasmasystemsforcreatingcoatingsonaluminiumalloys[J].Mater.Letters,2003(57):1748-1751
[2]RamaKrishnaL ,SomarajuKRC ,SundararajanG .Thetribologicalper formanceofultra-hardceramiccompositecoatingsobtainedthroughmi croarcoxidation[J].Surf.Coat.Technol.,2003,(163):484-490
[3]SundararajanG ,RamaKrishnaL .MechanismsunderlyingtheformationofthickaluminacoatingsthroughtheMAOcoatingtechnology[J].Surf.Coat.Technol.,2003,(167):269-277
[4]XuY .RecentdevelopmentofmicroarcoxidationtechnologyonChina[J].Corros.Prot.,2003,4(24):154-157(徐勇.国内铝和铝合金微弧氧化技术研究动态[J].腐蚀与防护,2003,4(24):154-157)
[5]JiangYF ,LiJM ,JiangBL ,etal.AnalysisofformedfactorsofMicroarcoxidationceramiccoating[J].Surf.Technol.,2001,2(30):37-39(蒋永锋,李均明,蒋百灵等.铝合金微弧氧化陶瓷层形成因素的分析[J].表面技术,2001,2(30):37-39)
[6]ZhangXY ,FangM ,LuJC .Effectofelectrolyteparametersonmicroarcoxidationofaluminumalloy[J].Mater.Prot.,2002,8(35):39-41(张欣宇,方明,吕江川.电解液参数对铝合金微弧氧化的影响[J].材料保护,2002,8(35):39-41)
[7]GnedenkovSV ,KhrisanfovaOA ,ZavidnayaAG ,SinebrukhovSL .Compositionandadhesionofprotectivecoatingsonaluminum[J].Surf.Coat.Technol.,2001,(145):146-151
[8]BeijingNormalUniversityandCentralChinaNormalUniversity,TheStaffRoomofInorganicChemistryedit.InorganicChemistry[M ].Beijing:HigherEducationPress,1992,9(北京师范大学,华中师范大学无机化学教研室编.无机化学[M].北京:高等教育出版社,1992,9)
[9]HaoJM ,ChenH ,JiangBL .Corrosionresistanceofmagnesiumalloymi croarcoxidationceramiccoating[J].TheChin.J .NonferrousMetals,2003,4(13):988-991(郝建民,陈宏,蒋百灵.镁合金微弧氧化陶瓷层的耐蚀性[J].中国有色金属学报,2003,4(13):988-991)
[1] WANG Shuyan,XIA Yongping,LIU Li. Influences of C3H8O3 Concentration on Formation and Characteristics of MAO Coatings on AZ91D
Magnesium Alloy
[J]. 中国腐蚀与防护学报, 2013, 33(3): 235-240.
[2] XU Ke,XIAO Shubin,LIU Yanhui,RUAN Guoling. Corrosion Behavior of Microarc Oxidized Alumina Films in High Temperature NaCl Solution[J]. 中国腐蚀与防护学报, 2013, 33(1): 17-22.
[3] LI Junming, XUE Xiaonan, WANG Aijuan, MA Anbo, FU Zhizhao. ELECTROLESS NICKEL PLATING OF MAGNESIUM ALLOY WITH MICROARC OXIDATION PRETREATMENT[J]. 中国腐蚀与防护学报, 2012, 32(1): 23-27.
[4] ;. Study on Corrosion Failure Mechanism of Microarc Oxidation Coatings Formed on AZ91D Magnesium Alloy[J]. 中国腐蚀与防护学报, 2008, 28(4): 219-224 .
No Suggested Reading articles found!