|
|
CORROSIVE WEAR BEHAVIOR OF COPPER ALLOYS IN3.5%NaCl+S~(2-) SOLUTIONS |
WANG Jihui JIANG Xiaoxia LI Shizhou (Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110015) |
|
|
Abstract The corrosion rate, corrosive were rate and polarization curves of aluminium brass and cupronickel alloy were determined in 3.5%NaCl and 3.5% NaCl+S2- solutions. The wear tracks of copper alloys were observed by SEM. The specific energy of the surface layer after corrosion was also measured by single pendulum scratching test. Experimental results showed that the addition of sulfide to 3.5%NaCl solution accelerated the corrosion and corrosive wear of copper alloy, shifted the corrosion potential towards negative, and increased the corrosion current density. The acceleration of corrosive wear could be attributed to the surface embrittlement induced by sulfide.
|
Received: 25 April 1997
|
1 Macdonald D D, Syrett B C, Wing S S. Corrosion, 1979, 35: 367 2 Syrett B C, Macdonald D D. Corrosion 1979, 35: 409 3 Fontana M G, Green N D. Corrosion Engineering, 2nd ed. New York: McGraw Hill, 1987 4 肖纪美.腐蚀总论-材料的腐蚀及其控制方法,北京:化学工业出版社,1994,p77 5 张天成,姜晓霞,路新春,李诗卓.中国腐蚀与防护学报,1994,14(4):207 6 张天成,姜晓霞,李诗卓,师昌绪.材料保护,1995,(1):1 7 梁亚南.中国科学院金属研究所博士学位论文,1995 8 张天成,姜晓霞,路新春,李诗卓.材料研究学报,1995,8(5):397 9 Beccaria A M, Poggi G, Traverso P, Ghiazza M. Corrosion science, 1991, 32(11): 1263 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|