Please wait a minute...
J Chin Soc Corr Pro  1982, Vol. 2 Issue (1): 18-26    DOI:
Current Issue | Archive | Adv Search |
ANALYSIS OF STRESS CORROSION FAILURE OF FASTENING BOLT
Chu Wuyang Yao Yuqin Jin Zheng Hsiao Chimei and Lin Shi (Department of Metal Physics; Beijing University of Iron and Steel Technology)
Download:  PDF(1573KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The accidental failures of fastening bolt(M33) made of Ultra-high strength steel 3OCrMnSiNi2 were investigated by fraetography. The result showed that it was stress corrosion fracture in water or БФ-2gum. The K_(ISCC) and da/dt of 3OCrMnsiNi2 steel in water and БФ-2 gum were measured by the constant load and constant displacement specimen of L-C and R-C direction. For three low alloy steels, the influence of heat treatment on the K_(ISCC) and da/dt were investigated. The threshold value of stress corrosion cracking of the notch specimen K_(ISCC)(ρ)was measured by modified WOL type notched specimens of various tip radius ρ. The result was as follows where A and B are constants for the speejfje materials. For 3OCrMnSiNi2 (T. S.=158OMPa), the parameters A, B and ρ are 21.7 MPa m~(1/2), 4180 MPa and 0.027 mm respectively. The accidental failures of the fastening bolt with pre-crack or no crack are quantitatively analyzed by linear elastic fracture mechanics. According to these results. preventive measures to avoid failure of the fastening bolt have been suggested.
Received:  25 February 1982     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

Cite this article: 

Chu Wuyang Yao Yuqin Jin Zheng Hsiao Chimei and Lin Shi (Department of Metal Physics; Beijing University of Iron and Steel Technology). ANALYSIS OF STRESS CORROSION FAILURE OF FASTENING BOLT. J Chin Soc Corr Pro, 1982, 2(1): 18-26.

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y1982/V2/I1/18

[1] 褚武扬,肖纪美,李世琼;金属学报,17,10(1981)
[2] 褚武扬,肖纪美,李世琼,王枨;金属学报,16,179(1980)
[3] Chu.w.y(褚装扬),Hsiao.C.M(肖纪美),Li,S.Q(李世琼);Scripta Met.,13,1057(1969)
[4] Chu.w.y(褚装扬),Li,T.H(刘天化),Hsiao,C.M(肖纪美).Li,S.Q(李世琼);Corrosion,57,320(1981)
[5] T. Tada, etc. "The stress Analysis of cracks Handbook", 19-13(1973)
[6] J. P. Benthen, etc; Mech. of Fraet., 1, 116(1973)
[7] G. C. Sih; "Stress Analysis of Noth problems", 55(1978)
[8] 西田正考;“应力集中”,丸善珠式社会135(1966)
No related articles found!
No Suggested Reading articles found!