| [1] Hajdu J. Electroless plating: The past is prologue[J]. Plat. Surf. Finish., 1996, 83(9): 29-33 [2] Williams J E, Davison C. Review of the capabilities and properties of electroless plated thin film media for rigid memory disks[J]. J. Electrochem. Soc., 1990, 137(10): 3260-3269 [3] Osmola D, Nolan P, Erb U, et al. Microstructural evolution at large driving forces during grain growth of ultrafine-grained Ni-1.2wt%P[J]. Physica Status Solidi (a), 1992, 131(2): 569-575 [4] Robertson A, Erb U, Palumbo G. Practical applications for electrodeposited nanocrystalline materials[J]. Nanostruct. Mater., 1999, 12(5-8): 1035-1040 [5] Lin C S, Lee C Y, Chen F J, et al. Structural evolution and internal stress of nickel-phosphorus electrodeposits[J]. J. Electrochem. Soc., 2005, 152(6), 370-375 [6] Park H D, Chang D, Lee K H, et al. Internal stress in Ni-P electrodeposits[J]. Plat. Surf. Finish., 2001, 88(12), 64-66 [7] Lin C S, Lee C Y, Chen F J, et al. Electrodeposition of nickel-phosphorus alloy from sulfamate baths with improved current efficiency[J]. J. Electrochem. Soc., 2006, 153(6): 387-392 [8] Hou K H, Hwu W H, Ke S T, et al. Ni-P-SiC composite produced by pulse and direct current plating[J]. Mater. Chem. Phy., 2006, 100(1), 54-59 [9] Lashmore D S, Weinroth J F. Pulsed electrodeposition of nickel-phosphorus metallic glass alloys[J]. Plat. Surf. Finish., 1982, 69(8), 72-76 [10] Chen F J, Pan Y N, Lee C Y, et al. Internal stress control of nickel-phosphorus electrodeposits using pulse currents[J]. J. Electrochem. Soc., 2010, 157(3): 154-158 [11] Pouderoux P, Chassaing I, Bonino J P, et al. Plating of nickel-phosphorus multilayer alloys: current pulse effects on the microstructural and mechanical properties[J]. Surf. Coat. Technol., 1991, 45(1-3), 161-170 [12] Fei J Y, Liang G Z, Xin W L. Composition and morphology of Zn-Co alloy coatings deposited by means of pulse plating containing reverse current[J]. J. Wuhan Univ. Techn. Mater., 2007, 22(3), 417-421 [13] Kuruma K, Yamada K, Sato K, et al. The Effect of crystal structure on hardness in electroplated Ni-P films[J]. J. Surf. Finish. Soc. Jpn., 1991, 42(10), 1013-1018 [14] Marshall G W, Lewis D B, Clayton D, et al. The electrodeposition of Ni-P-Al2O3 deposits[J]. Surf. Coat. Technol., 1997, 96(2), 353-358 [15] Choo R T C, Toguri J M, Erb U, et al. Mass transfer and electrocrystallization analyses of nanacrystalline nickel production by pulse plating[J]. J. Appl. Electrochem., 1995, 25(4): 34-403 [16] TAN J, GUO W C, XU B S, et al. Corrosion resistance of Ni/n-SiO2 composite coatings by pulse-reverse brush plating[J]. J. Chin. Soc. Corros. Prot., 2006, 26(4): 193-196 (谭俊, 郭文才, 徐滨士等. 脉冲换向电刷镀镍基纳米SiO2复合镀层的耐腐蚀性能研究[J]. 中国腐蚀与防护学报, 2006, 26(4): 193-196) [17] Zoikis-Karathanasis A, Pavlatou E A, Spyrellis N. Pulse electrodeposition of Ni-P matrix composite coatings reinforced by SiC particles[J]. J. Alloys Compd., 2010, 494(1-2), 396-403 |
