LC-4铝合金应力腐蚀裂纹内的电化学行为

中国腐蚀与防护学报

1984, Vol. 4

Issue (1): 30-40

研究报告

本期目录 | 过刊浏览

LC-4铝合金应力腐蚀裂纹内的电化学行为

黄子勋;何业东;侯力

北京航空学院材料科学系;北京航空学院材料科学系;北京航空学院材料科学系

ELECTROCHEMICAL BEHAVIOR WITHIN THE SCC CRACKS OF ALUMINUM ALLOY LC-4

Huang Zixun He Yedong Hou Li (Beijing Institute of Aeronautics and Astronautics;Beijing;China)

全文: PDF(880 KB)

摘要: 本文提出了一种测定应力腐蚀裂纹内的电位和 pH 值的方法。这种方法适用于应力腐蚀裂纹内和各种腐蚀缝隙内的电化学测试。设备简单,操作方便而且精确度高。文中列出用该法测定 LC-4铝合金应力腐蚀裂纹尖端处微区的电化学数据,并结合电位 pH 图进行了讨论和分析。作者根据所得结果提出由微电池相互耦合而成的多电极体系等效电路模型,可以较好地解释本文的实验结果。对于 LC-4铝合金,裂纹尖端电位与 pH 值间存在下列关系=-0.750-0.043pH(SCE)而在 Pourbaix 图中则穿过钝化区,并与应力腐蚀敏感性存在对应关系。

Abstract：A new method for the determination of potential and pH value within the SCC cracks has been proposed.The simple device can be conveniently used to measure and follow the electrochemical behavior within the SCC cracks or any corrosion crevices with high accuracy. In this paper,both the results of the measurements within SCC cracks as well as crack tips of LC-4 aluminum alloy and a discussion with these data in relation to the potential-pH diagram of aluminum alloy were presented. The authors proposed an equivalent circuit model constructed by the couple of numerous corrosion microcells in accordance with the results of measure- ment to explain the data from our experiments.For aluminum alloy LC-4,the relationship between the pH and the crack tip potential will be: =-0.750-0.043 pH(SCE) In the Pourbaix diagram,the position of the corrosion system will extend through the region of passivity in response to the sensitivity of SCC of the alloy.

收稿日期: 1984-02-25

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	黄子勋
	何业东
	侯力
44.8K

引用本文:

黄子勋;何业东;侯力. LC-4铝合金应力腐蚀裂纹内的电化学行为[J]. 中国腐蚀与防护学报, 1984, 4(1): 30-40.
. ELECTROCHEMICAL BEHAVIOR WITHIN THE SCC CRACKS OF ALUMINUM ALLOY LC-4. J Chin Soc Corr Pro, 1984, 4(1): 30-40.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1984/V4/I1/30

[1] Brown,B.F.;Dahlberg,E.P.,J.Electrochem.Soc.,116,2,218(1989)
[2] Smith,J.A.;Peterson,M.H.;Brown,B.F.,Corrosion,26,12,539(1970)
[3] Davis,J.A.,Localized Corrosion,ed.by R.W.Staehle,et al.,NACE,Houston.Texas,169(1974)
[4] Nguyen,T.H.;Brown,B.F.;Foley,R.T.,Corrosion,38,6,319(1982)
[5] Pourbaix,M.,The Theory of Stress Corrosion Cracking in Alloys,ed.by J.C.Scully,Brussels,NATO,Scientzifie Affairs Division,17(1971)
[6] Chen,C.M.;Froning,M.H.;Verink,Eo D.,Stress Corrosion,New Approaches,ed.by H.L.Craig,Philao,289(1976)
[7] 北村公一、佐藤栄一:轻金属,29,12,564(1979)
[8] Hoar,T.P.,Corrosion,19,10,331(1963)
[9] Doing,P.;Flewitt,P.E.F.,Mechanisms of Environment Sensitive Cracking of Materials,Proceedings of an international Conference,Guildford,ed.by.Swann,et al.,London,113(1977)
[10] Н.Д.托马晓夫著,华保定译,《金属腐蚀及其防护的理论》,机械工业出版社,202(1965)
[11] 北京师范大学无机教研室等编:《无机化学上册》,人民教育出版社,201(1981)
[12] 杭州大学化学系分析化学教研室编:《分析化学手册第一分册》,化学工业出版社,28(1979)
[13] Latanaition,R.M.,在北京钢铁学院的讲学报告。(1981)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed