Please wait a minute...
中国腐蚀与防护学报  1984, Vol. 4 Issue (4): 308-314    
  研究报告 本期目录 | 过刊浏览 |
镧对非晶态FeCr_(8.6)Ni_(12)P_(14)B_6合金耐蚀性的影响
浦桂根;冯平义;俞龙飞;陈念贻;俞志中
中国科学院上海冶金研究所;中国科学院上海冶金研究所;中国科学院上海冶金研究所;中国科学院上海冶金研究所;上海测试中心
THE EFFECT OF La ON THE CORROSION RESISTANCE OF AMORPHOUS FeCr_(8.6)Ni_(12)P_(14)B_6 ALLOY
Pu Guigen; Feng Pinyi; Yu Longfei and Chen Nienyi(Shanghai Institute of Metallurgy; Academia Sinica) Yu Zhlzhong(Shanghai Institute of Measuring and Testing Technology)
全文: PDF(497 KB)  
摘要: 添加微量La能显著改善FeCr_(8.6)Ni_(12)P_(14)B_6非晶态合金的耐蚀性能。在该合金中加入0.075%La后,所得非晶态合金在4N盐酸中有较好的耐蚀性能(腐蚀率小于10~(-2)毫米/年)。AES和XPS的分析结果说明,添加微量La能促进合金在HCl溶液中形成薄而致密的表面膜,这是改善其耐蚀性的主要原因。
Abstract:It was found that the addition of a small amount of La significantly improved the corrosion resistance of amorphous FeCr_(8.6)Ni_(12)P_(14)B_6 alloy. The addition of 0.075% La to this alloy imparts to it moderate corrosion resistance in a 4N HCl solution(with corrosion rate less than 10~(-2)mm/year). The surface of the La-containing alloy and its counterpart sample without La addition was analysed by AES and XPS method. It can be seen that the La-containing alloy has a thinner and denser passive surface film with better corrosion resistance.
收稿日期: 1984-08-25     

引用本文:

浦桂根;冯平义;俞龙飞;陈念贻;俞志中. 镧对非晶态FeCr_(8.6)Ni_(12)P_(14)B_6合金耐蚀性的影响[J]. 中国腐蚀与防护学报, 1984, 4(4): 308-314.
. THE EFFECT OF La ON THE CORROSION RESISTANCE OF AMORPHOUS FeCr_(8.6)Ni_(12)P_(14)B_6 ALLOY. J Chin Soc Corr Pro, 1984, 4(4): 308-314.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1984/V4/I4/308

[1] Naka, M. et al, J. Non-Cryst. Solids, 31, 3, 355(1979)
[2] Ken-ichi, et al, Proe. 4th. Int. Conf. on Rapidly Quenched Mtals, 1445(1981)
[3] Kongjo cho, etal., ibid 1479
[4] Masumoto, J. et al., J. de physique, C8-894
[5] Thomas, M. T. et al., Proc. 4th. Int. Conf. on Rapidly Quenched Metals, 1453(1981)
[6] Wagner, C. D. et al., HandBook of X-Rag photoelectron spectroscopy G. E. Muilenterg (Editor), (1979)
[7] 范耀木,浦桂根,刘同钧,俞龙飞,中国腐蚀与防护学报 1,1,10(1981)
No related articles found!