| [1]Guo Q J, Zhang K, Liu Z Y. Conversion of biomass in the fluidized bed [J]. Coat Convers., 1998, 21(6): 33-37
(郭庆杰，张锴，刘振宇. 生物质的流化床转化 [J]. 煤炭转化，1998, 21(6): 33-37)
[2] Liu C, Little J A, Henderson P J, et al. Corrosion of TP347H FG stainless steel in abiomass fired utility boiler [J]. J.Mater. Sci., 2001, 36: 1015-1026
[3] Gad M M A, Salem H G, Nasreldin A M, et al. Localized corrosion behavior of 6% Mo super austenitic & 316 L stainless steels in low pH 3%NaClsolution [J]. J. Mater. Sci. Technol., 2005, 21(4): 465-469
[4]Huang Z R, Xu H, Li P N. The oxidation behavior of aluminized HK40 steel coatedwith Y2O3 thin film [J]. J. Chin. Soc. Corros. Prot.,2003, 23（2）: 124-128
(黄志荣, 徐宏, 李培宁. 表面电沉积-烧结Y2O3薄膜的渗铝HK40钢的氧化行为研究 [J]. 中国腐蚀与防护学报, 2003, 23（2）: 124-128)
[5]Ren X, Xu Y, Wang F H. High temperature oxidation behavior of a sputtered NiCrAlY coating with aluminizing [J]. J. Chin. Soc. Corros. Prot.,2006, 26（2）: 365-370
(任鑫, 徐洋, 王福会. 溅射NiCrAlY渗Al涂层的高温氧化行为 [J]. 中国腐蚀与防护学报,2006, 26（2）: 365-370)
[6]Zhang Y M, Li M H. Cyclic oxidation of aluminized coatings on 16 Mn steel under the condition of quenching in sea water [J]. J.Chin. Soc. Corros. Prot., 2002, 22（1）: 44-47
(张亚明, 李美栓. 16 Mn钢渗铝涂层在海水淬冷时的循环氧化行为 [J]. 中国腐蚀与防护学报,2002, 22（1）: 44-47)
[7]Zhang Q, Chen J H, Li Y J. Microstructure and oxidation-resistance property of aluminizing layer of two kinds of high-chromium steel [J]. Heat Treat. Met., 2000, 10: 7-10
(张黔, 陈建华, 李友均. 两种高铬钢渗铝层的组织和抗氧化性能 [J]. 金属热处理, 2000, 10: 7-10)
[8]Luo H, Yin X F. Research progress of pack aluminizing of low carbon steel and stainless steel [J]. J. Sichuan Univ. Sci. Eng., 2008, 21: 97-100
(罗宏, 尹显飞. 低碳钢和不锈钢粉末渗铝研究进展 [J]. 四川理工学院学报, 2008, 21:97-100)
[9]Li L F, Shen J N, Li M C, et al. Pack aluminizing process and characterization of aluminized layer on stainless steels [J]. Corros.Sci. Prot. Technol., 2004, 16（2）: 79-82
(李凌峰, 沈嘉年, 李谋成等. 不锈钢表面粉末包埋渗铝过程及渗铝层表征 [J]. 腐蚀科学与防护技术, 2004, 16（2）: 79-82)
[10]Mo L M, Duan Z H, Gao Y. Pack aluminizing layer of 1Cr18Ni9Ti stainless steel and its oxidation resistance performance at high temperature [J]. J. Tai Yuan Univ. Technol., 2005, 36（3）: 342-345
(莫利明，段滋华，高原. 碳钢表面粉末渗铝试验及其性能研究 [J]. 太原理工大学学报，200536（3）: 342-345)
[11]Luo X M, Xu Y, CHEN K M. Microstructure and oxidation resistance of diffusion-treated aluminizing layer on 1Cr18Ni9Ti stainless steel [J]. Heat Treat. Met.，33（12）: 42-45
(罗新民，许勇，陈康敏. 1Cr18Ni9Ti不锈钢渗铝层结构及其抗氧化性能 [J]. 金属热处理，33（12）: 42-45)
[12]Gao H X, Wang H W, Li F G. The appraisal on SCC susceptibility of aluminized 304 stainless steel by different test means [J]. J.Chin. Soc. Corros. Prot., 2004, 24（5）: 289-292
(高红霞, 王红卫, 栗富国. 渗铝304不锈钢不同试验方法的SCC敏感性评价 [J]. 中国腐蚀与防护学报, 2004, 24（5）: 289-292)
[13]Wang D Q, Shi Z Y. Aluminizing and oxidation treatment of 1Cr18Ni9 stainless steel [J]. Appl. Surf.Sci., 2004, 227: 255-260 |
