电化学改性不锈钢钝化膜的耐蚀机理研究  Ⅰ.钝化膜的化学组分、结构及表面缺陷特征

中国腐蚀与防护学报

1992, Vol. 12

Issue (3): 205-212

研究报告

本期目录 | 过刊浏览

电化学改性不锈钢钝化膜的耐蚀机理研究 Ⅰ.钝化膜的化学组分、结构及表面缺陷特征

林昌健;茅禹;田昭武

厦门大学;厦门大学;厦门大学

NATURE OF CORROSION RESISTANCE FOR THE ELECTROCHEMICALLY MODIFIED PASSIVE FILM OF 18-8 STAINLESS STEEL Ⅰ. THE CHARACTERISTICS OF CHEMICAL COMPOSITION, STRUCTURE AND CHEMICAL HETEROGENEITY OF THE PASSIVE FILM

Lin Changjian; Mao Yu and Tian Zhowu (Xiamen University)

全文: PDF(966 KB)

摘要: 应用XPS,SEM,EDAX及电化学技术,考察了经电化学表面改性处理的18-8不锈钢钝化膜的化学组分、结构及表面缺陷状态的特征,探讨了改性钝化膜的高度耐腐蚀的原因及其机制。结果表明,改性钝化膜中结合水相对含量增加,有利于形成无定形结构的钝化膜表面层,膜中高价铬含量提高,CrO_3与Cr_2O_3共存组成稳定的耐蚀阻挡层,而CrO_4~(2-)使得钝化膜表面层具有阳离子选择性,可排斥侵蚀性阴离子,起到缓蚀作用。此外,改性钝化膜表面物理缺陷组分和状态的变化,使原为腐蚀活性的物理缺陷转变为对腐蚀非活性或对腐蚀比较不敏感,即钝化膜表面趋于均一化。因此,改性的不锈钢钝化膜具有很强的抗局部破坏和耐腐蚀能力。

Abstract：The XPS,SEM, EDAX and electrochemical techniques were used to examine the characteristics of the chemical composition, structure and surface microscopic heterogeneity of the passive film on 18-8 stainless steel treated by a new electrochemical appreach. It was evident that the relative content of bound water and Cr species with high valence increased in the modified passive film. The modification of the physical defects on surface was observed after the electrochemical surface treatment. The nature and mechanism of the extremely high corrosion resistance of the modified passive film was discussed.

收稿日期: 1992-06-25

基金资助:国家自然科学基金

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	林昌健
	茅禹
	田昭武
44.8K

引用本文:

林昌健;茅禹;田昭武. 电化学改性不锈钢钝化膜的耐蚀机理研究 Ⅰ.钝化膜的化学组分、结构及表面缺陷特征[J]. 中国腐蚀与防护学报, 1992, 12(3): 205-212.
. NATURE OF CORROSION RESISTANCE FOR THE ELECTROCHEMICALLY MODIFIED PASSIVE FILM OF 18-8 STAINLESS STEEL Ⅰ. THE CHARACTERISTICS OF CHEMICAL COMPOSITION, STRUCTURE AND CHEMICAL HETEROGENEITY OF THE PASSIVE FILM. J Chin Soc Corr Pro, 1992, 12(3): 205-212.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1992/V12/I3/205

[1] 林昌键、田昭武.中国发明专利.87． 103570． 7． 1987
[2] 林昌健、田昭武,中国腐蚀与防护学报.5,117(1985)
[3] Leidheiser, Jr. H. ,in "Passivity of Metals". Frankenthal, R. P. and Kruger, J. Eds. , Electrochemical Soc. , pennington, 223(1978)
[4] Okamoto, G. and Shibata, T. ibid. , 646(1978)
[5] Janik-Czachor,M. , Corrosion, 35,360(1979)
[6] Asami, K. et al., Corrosion Science, 18,151(1978)
[7] Warren, J. B. and Clayton. C. R. , in"Passivity of Metals and Semiconductors", Froment, M. Ed. , Elsevier Science publishers, 585 (1983)
[8] Paola, A. D. et al., Corrosion Science, 26, 935(1986)
[9] Brooks, A. R. et al. , J. Electrochem. Soc. , 133, 2459(1986)
[10] McBee, G. L. and Kruger, J. , Electrochimica Acta,17,1337(1976)
[11] Daufin, G. et al. , Corrosion 41,533(1985)
[12] Barbosa, M. A. , Corrosion, Science 23, 1293 (1983)
[13] Duqyette, D. J. and Cieshak, W. R., Corrosion, 40, 545(1984)
[14] Cieshak, W. R. , Corrosion, 40, 103(1984)
[15] Pou, T. E. et al. , J. Electrochem. Soc. 131, 1243(1984)
[16] Sakashita, M. and Sato, N.. Corrosion Science ,17, 473(1977)
[17] 林昌健.博士论文.厦门大学,1985
[18] Hultquist, G. et al. , in "Passivity Metals and Semiconductors" Ed. by Froment, M. 399(1983)
[19] Sedriks, A. J. , Corrosion, 42, 376 (1986)
[20] Sedriks A. J. , International Metal Review, 28, 295(1983)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed