腐蚀磨损中添加剂的作用机理初探

中国腐蚀与防护学报

1991, Vol. 11

Issue (3): 285-291

研究报告

本期目录 | 过刊浏览

腐蚀磨损中添加剂的作用机理初探

姜晓霞;孙秋霞;李诗鋽;张建中

中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所;中国科学院金属研究所

A PRELIMINARY STUDY OF THE EFFECT OF ADDITIVES ON CORROSIVE WEAR OF 1045 STEEL

Jiang Xiaoxia Sun Qiuxia Li Shizhuo and Zhang Jianzhong (Institute of Metal Research; Academia Sinica)

全文: PDF(966 KB)

摘要: <正> 一、引言传统的缓蚀剂及润滑添加剂等在腐蚀磨损环境中是否仍然有效一直是人们关心的问题。45钢在添加K_2Cr_2O_7、(CH_2)_6N_4或IMC-5缓蚀剂和十二烷基磺酸钠(SDBS)润滑添加剂的稀H_2SO_4或NaCI溶液中,其磨损失重与载荷或摩擦速度的关系表明这些添加剂对抑制材料的流

Abstract：The relationship between friction coefficient and potential, the polarization curves during sliding and the change of potential with sliding speed of 1045 steel were determined in dilute H_2SO_4 or NaCl solution with various types of additives such as K_2Cr_2O_7, SDBS, IMC-5 (trade name of an inhibitor with salt of quaternary amine as main component)and (CH_2)_6N_4 by means of a pin on disc device. The recovery rate of surface film formed by additive during sliding was measured by a transient corrosive wear device. Experimental results show that the ability of the additives to control corrosive wear is dependent on the antifriction behavior,the corrosive inhibition,the load carrying capacity and the recovery rate of surface film.

收稿日期: 1991-06-25

基金资助:国家自然科学基金

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	姜晓霞
	孙秋霞
	李诗鋽
	张建中
44.8K

引用本文:

姜晓霞;孙秋霞;李诗鋽;张建中. 腐蚀磨损中添加剂的作用机理初探[J]. 中国腐蚀与防护学报, 1991, 11(3): 285-291.
. A PRELIMINARY STUDY OF THE EFFECT OF ADDITIVES ON CORROSIVE WEAR OF 1045 STEEL. J Chin Soc Corr Pro, 1991, 11(3): 285-291.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1991/V11/I3/285

[1] 李诗鋽、孙秋霞、姜晓霞;中国腐蚀与防护学报10(3) ,246(1990)
[2] 张建中,姜晓霞、李诗鋽;腐蚀科学与防护技术2(2) ,33(1990)
[3] 李诗鋽、李明、姜晓霞、张丹;中国腐蚀与防护学报8(4) ,267(1988)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed