30Cr3SiNiMoWV超高强度钢的晶界特征与应力腐蚀沿晶断裂

中国腐蚀与防护学报

1990, Vol. 10

Issue (1): 15-21

研究报告

本期目录 | 过刊浏览

30Cr3SiNiMoWV超高强度钢的晶界特征与应力腐蚀沿晶断裂

李光福;吴忍畊;雷廷权

哈尔滨工业大学;哈尔滨工业大学;哈尔滨工业大学

THE CHARACTERISTICS OF GRAIN BOUNDARIES AND INTERGRANULAR STRESS CORROSION CRACKING OF 30Cr3SiNiMoWV ULTRA—HIGH STRENGTH STEEL

Li Guangfu Wu Rengen Lei Tingquan (Harbin Institute of Technology)

全文: PDF(836 KB)

摘要: 用俄歇电子能谱等方法研究了30Cr 3 SiNiMoWV 超高强度钢回火马氏体组织中原奥氏体晶界上的元素偏聚及其与应力腐蚀沿晶断裂之间的关系。结果表明,在原奥氏体晶界上有明显的碳和磷偏聚。晶界是一个高碳区,存在着一个碳化物微层,磷偏聚在晶界上呈随机性分布。碳化物微层与基体间的界面对氢的强捕集作用及其促进阳极溶解局部化,以及磷对氢原子化合成氢分子的抑制作用,使该钢种易于发生应力腐蚀沿晶断裂。

Abstract：The characteristics of prior austenitic grain boundaries in tempered martensitic microstructure in relation to intergranular stress corrosion cracking of 30Cr3SiNiMoWV ultra-high strength steels were investigated mainly with Auger electron spectroscopy.The results showed that carbon and phosphorus segregated apparently at the grain boundaries.There is a very thin layer of carbide at the carbon enriched grain boundaries, where segregated phosphorus distributes randomly.The basic reason why this steel is susceptible to intergranular stress corrosion cracking is that the interface between the carbide layer and the matrix provides a strong trap for hydrogen and promotes the localization of anodic dissolution, while phosphorus hinders the formation of hydrogen molecules from hydrogen atoms.

收稿日期: 1990-02-25

基金资助:中科院科学基金资助

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李光福
	吴忍畊
	雷廷权
44.8K

引用本文:

李光福;吴忍畊;雷廷权. 30Cr3SiNiMoWV超高强度钢的晶界特征与应力腐蚀沿晶断裂[J]. 中国腐蚀与防护学报, 1990, 10(1): 15-21.
. THE CHARACTERISTICS OF GRAIN BOUNDARIES AND INTERGRANULAR STRESS CORROSION CRACKING OF 30Cr3SiNiMoWV ULTRA—HIGH STRENGTH STEEL. J Chin Soc Corr Pro, 1990, 10(1): 15-21.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1990/V10/I1/15

[1] 吴忍畊;李仁顺;石宏欢;崔忠圻;唐之秀,航天工艺,金属材料的氢脆与应力腐蚀开裂专辑,P.74,(1983)
[2] Beachem,C.D.,Metall.Trgns.,3A,P.437 (19/2)
[3] Banerji,S.K.;McMahon,C.J.;Feng,H.C.,Metall.Trans.,9A,P.237(1978)
[4] Bandyopadhyay,N.;Jun Kameda;McMahon,C.J.,Metall.Trans.,14A,P.881 (1983)
[5] 林栋梁:吴建生,金属学报,20,A62(1984)
[6] 林栋梁;吴建生,中国机械工程学会材料分会第二届应力腐蚀、氢脆、腐蚀疲劳学术会议论文集,1987,P.242,九江
[7] Simmons,G.W.;Pao,P.S.;Wei,R.P.,Metall.Trans.,9A,P.1147(1978)
[8] Sandoz,G.,Met all.Trans.,2A,P.1055(1971)
[9] Sandoz,G.,Metall.Trans.,3A,P.1169 (1972)
[10] 陈永朴;王永瑞,金属电子显微分析,机械工业出版社,P.222(1982)
[11] Czanderna,A.W.,强俊;胡中兴译,表面分析方法:国防工业出版社,P.99(1984)
[12] Hirth,J.P.,Metall.Trans.,11A,P.861 (1980)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed