环氧/玻纤复合材料界面层结构及耐腐蚀性能

中国腐蚀与防护学报

1988, Vol. 8

Issue (2): 105-112

研究报告

本期目录 | 过刊浏览

环氧/玻纤复合材料界面层结构及耐腐蚀性能

林永渭;吴叙勤;张元民;邱永坚;顾里之

华东化工学院;华东化工学院;华东化工学院;上海材料研究所;上海材料研究所

THE INTERFACE STRUCTURE AND CORROSION PROPERTIES IN EPOXY/GLASS COMPOSITE MATERIAL

Lin Yongwei Wu Xuqing Zhang Yuanmin (East China Institute of Chemical Technology) Qiu Yongjin Gu Lizhi (Shanghai Research Institute of Materials)

全文: PDF(1829 KB)

摘要: 本文作者采用XPS,单丝模型,SEM和测定电阻率等方法研究了玻纤表面以A-151、A-186 KH550偶联剂处理后形成的界面层结构;介质在环氧/玻纤复合材料中的扩散系数;界面的粘结形貌等对复合材料耐蚀性能的影响。实验表明,既能与玻纤表面产生化学反应又能与环氧基体形成化学共价键的界面具有较高的界面粘结能,完善的界面粘结形貌,较低的介质扩散系数和良好的界面耐腐蚀性。

Abstract：The surface structure of glass fiber treated with different silane coupling such as A151, A186, KH550, and the diffusivity of medium in epoxy/glass composite material as well as the adhesive shape of interface have been studied by means of SEM, Single Filament Test, XPS and Specific resistance. The results show that interface with covalent bond reacted with-SiOH both on the surface of glass and in the epoxy matrix is better than that without covalent bond. This type of covalent bond interface had: a) stronger interface adhesion; b) a good shape of interface adhesion; c) lower diffusivity of medium in composite materials; and d) good corrosion-resistant properties of interface.

收稿日期: 1988-04-25

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	林永渭
	吴叙勤
	张元民
	邱永坚
	顾里之
44.8K

引用本文:

林永渭;吴叙勤;张元民;邱永坚;顾里之. 环氧/玻纤复合材料界面层结构及耐腐蚀性能[J]. 中国腐蚀与防护学报, 1988, 8(2): 105-112.
. THE INTERFACE STRUCTURE AND CORROSION PROPERTIES IN EPOXY/GLASS COMPOSITE MATERIAL. J Chin Soc Corr Pro, 1988, 8(2): 105-112.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1988/V8/I2/105

[1] 邱永坚、顾里之、吴叙勤、张元民,中国腐蚀与防腐学报,6(3) ,167(1986)
[2] 李国茉等,中国腐蚀与防护学报,3(3) 159(1983)
[3] Abeysinghe, H. P., et al., Composites, 14(1) , 57(1983)
[4] Loos, A. C., Springer, G. S., J、Composites materials, 4(11) , 142(1980)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed