Please wait a minute...
中国腐蚀与防护学报  1983, Vol. 3 Issue (2): 104-111    
  研究报告 本期目录 | 过刊浏览 |
四种高温合金循环氧化性能的研究
王嘉敏;周洪贤;蒋林根
洛阳船舶材料研究所;洛阳船舶材料研究所;洛阳船舶材料研究所
A STUDY OF THE CYCLIC OXIDATION BEHAVIOUR OF FOUR SUPERALLOYS
Wang Jiamin Zhou Hongxian and Jiang Lingen(Luoyang Shipbuilding Material Research Institute)
全文: PDF(644 KB)  
摘要: 在900、950、1000、1050和1100℃下,对四种国产高温合金(211、208、GH-37和M-38)进行了200次循环氧化试验。结果表明,在较低温度下氧化重量变化曲线呈线性增重;1000℃以上时由于氧化皮的大量剥落而很快出现失重,且剥落量的对数与温度呈直线关系。在循环氧化条件下,M-38和GH-37两合金的合金元素(Cr、Al等)贫化带宽度的对数与温度呈直线关系。
Abstract:Cyclic oxidation resistance of four home-made superalloys (211, 208, GH-37 and M-38) has been investigated at 900, 950, 1000, 1050 and 1100℃.Specimens were subjected to 200 thermal cycles, each of which consists of 1 hr heating followed by 10 min air cooling. Thermogravimetric measurements at lower temperatures showed linear weight gain with time. However, at temperatures above 1000℃ , weight loss following a short period of initial weight gain was observed due to severe spallation of the oxide scales. The logarithm of the amount of spallation increases linearly with oxidation temperature. Metallographic examination reveals the formation of the zone of depletion in certain alloying elements (Cr, Al, etc,). In the case of M-38 and GH-37 linear relationship between the logarithm of depth of the depletion zone and temperature was found.
收稿日期: 1983-04-25     

引用本文:

王嘉敏;周洪贤;蒋林根. 四种高温合金循环氧化性能的研究[J]. 中国腐蚀与防护学报, 1983, 3(2): 104-111.
. A STUDY OF THE CYCLIC OXIDATION BEHAVIOUR OF FOUR SUPERALLOYS. J Chin Soc Corr Pro, 1983, 3(2): 104-111.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1983/V3/I2/104

[1] D. P. Whittle, J. Stringer. N-79-25213 H2/C, 1 ~28 (1977)
[2] 治军编《美国镍基高温合金》。科学出版社(1978)
[3] G. J. Santoro, D. L. Deadmore, C. E. Lowell, NASA TN-D6416, 1~28(1971)
[4] C. E. Lowell, AD/A 013436, 535-354(1974)
[5] C. A. Barrett, G. J. Santoro, C. E. Lowell, NASA TN-D-7484 (1974)
[6] C. A. Barrett. C. E. Lowell, Oxidation of Metals, 11, 4, 199~223(1977)
[7] C. E. Lowell, Met Trans. 7 A, 5, 655~660 (1976)
[8] C. A. Barrett, C. E. Lowell, Oxidation of Metals, 9, 4. 307~355(1975)
[9] C. E. Lowell, D. L, Deadmore, Oxidation of Metals, 14, 4, 325~336 ( 1980 )
[10] D. L. Deadmore, NASA TN D-6842(1972)
[11] C. E. Lowell, NASA TN D-6834(1972)
[12] H. T. Michels, Met Trans, 9 A, 6, 873~878 ( 1978 )
[13] 佐野实,铁上钢,65, 7,772~778(1979)
[14] 周洪贤、 王嘉敏, M-38和K_3合金及其涂层的抗氧化性能的研究,洛阳船舶材料研究所, (1981)
[15] #12
[16] 洛阳船舶材料研究所,铸造铁基208合金, (1973)
[17] 王嘉敏:国外舰船技术-材料类, 6, 1~22(1980)
[18] 王嘉敏,董佩环,抗热腐蚀涂层合金高温腐蚀性能的研究,洛阳船舶材料研究所, (1981)
[19] J. B. Johnson, et al. Corrosion Science, 18, 6, 5275~53(1978 )
[20] S. R. Smith, et al, Oxidation of Metals, 14, 5, 415~435 ( 1980)
No related articles found!