腐蚀产物对锌合金镀层切边腐蚀行为的影响
李永坤, 周佳顺, 王友彬, 高锋, 王欣鹏, 汤宏群

Influence of Corrosion Products on Corrosion Behavior of Cut Edges of Galvanized Coatings/Q235 Carbon Steel
LI Yongkun, ZHOU Jiashun, WANG Youbin, GAO Feng, WANG Xinpeng, TANG Hongqun
图5 在5%NaCl溶液中浸泡不同时间后不同镀层切边处的SECM线扫描曲线
Fig.5 SECM line-scan curves at the cut edges of Zn (a), Zn-Mg (b), Zn-Al (c) and Zn-Al-Mg (d) coatings after immersion in 5%NaCl solution for different time