腐蚀产物对锌合金镀层切边腐蚀行为的影响
李永坤, 周佳顺, 王友彬, 高锋, 王欣鹏, 汤宏群

Influence of Corrosion Products on Corrosion Behavior of Cut Edges of Galvanized Coatings/Q235 Carbon Steel
LI Yongkun, ZHOU Jiashun, WANG Youbin, GAO Feng, WANG Xinpeng, TANG Hongqun
图3 镀层切边在5%NaCl溶液中浸泡6 h后的微观组织
Fig.3 SEM images of the cut edges of Zn (a), Zn-Mg (b), Zn-Al (c), Zn-Al-Mg (d) coatings after immersion in 5%NaCl solution for 6 h