冷拉拔变形过程中含稀土铝镁合金腐蚀行为研究
张欣1,2(
), 杨光恒1, 王泽华1, 曹静1, 邵佳1, 周泽华1
), 杨光恒1, 王泽华1, 曹静1, 邵佳1, 周泽华1
Corrosion Behavior of Al-Mg-RE Alloy Wires Subjected to Different Cold Drawing Deformation
ZHANG Xin1,2(), YANG Guangheng1, WANG Zehua1, CAO Jing1, SHAO Jia1, ZHOU Zehua1
), YANG Guangheng1, WANG Zehua1, CAO Jing1, SHAO Jia1, ZHOU Zehua1
图7. 铸态Al-3.0%Mg-0.12%RE合金在3.5%NaCl溶液中浸泡21 d后合金表面形貌和EDS分析
Fig.7. Surface morphologies (a, b) and EDS analysis (c, d) of as-cast Al-3.0%Mg-0.12%RE alloys after the 21 d immersion test in 3.5%NaCl solution
