模拟燃烧环境介质和温度对不锈钢表面氧化物形态的影响研究
谢冬柏1(
), 洪昊2, 王文3, 彭晓1, 多树旺2
), 洪昊2, 王文3, 彭晓1, 多树旺2
Oxidation Behavior of Stainless Steel 1Cr11Ni2W2MoV in a Simulated Kerosene Combustion Environment
XIE Dongbai1(), HONG Hao2, WANG Wen3, PENG Xiao1, DUO Shuwang2
), HONG Hao2, WANG Wen3, PENG Xiao1, DUO Shuwang2
图1. 高温氧化实验装置 (箭头所示方向为燃烧气体的流动方向)
Fig.1. Tube furnace setup for oxidation experiment in air and simulated kerosene combustion environments (the arrow along the furnace shows the flow direction of reaction gas from combustion furnace to reaction furnace)
