[1] Gell M, Vaidyanathan K, Barber B, Cheng J, Jordon E.  Metall. Mater. Trans., 1999, 30A: 427.


[2] Meier S M, Nissley D M, Sheffler K D, Cruse TA.  J. Eng.Gas. Turb. Power., 1992, 114: 258.


[3] Spitsberg I T, Mumm D R, Evans A G.  Mater. Sci. Eng.A., 2005, 394: 176-91.


[4] Haynes J A, Pint B A, More K L, Zhang Y, Wright I G.  Oxid. Met., 2002, 58: 513.


[5] Hou P Y.  Ann. Rev. Mater. Res., 2008, 38: 275.


[6] Kiely J, Yeh T, Bonnell D A.  Surf. Sci., 1997, 393: L126.


[7] Zhang W, Smith J R, Wang X G, Evans A G.  Phy. Rev. 2003, 67B: 245414.


[8] Hou P Y, Priimak K.  Oxid. Met., 2005, 63: 113.


[9] Smith J R, Jiang Y, Evans A G.  Int. J. Mater. Res., 2007, 12: 1214.


[10] Hayashi S, Wang W, Sordelet D J, Gleeson B.  Metall.Mater. Trans. 2005, 36A: 1769.


[11] Whittle D P, Stringer J. Phil.  Trans. R. Soc. London., 1998, A295: 309.


[12] Pint BA. In: Tortorelli P, Wright I G, Hou P Y. eds,  Proc.John Stringer Symposium on High Temp Corrosion, ASM Int., OH, 2001: 52


[13] Funkenbusch W, Smeggil J G, Bornstein N S.  Metall.Trans., 1985, 16A: 1164.


[14] Smialek J L, Browning R. In: Munir ZA,Cubicciott D, eds.  Proc. Sym. High Temp.Mater Chem. III, the Electrochem Soc., PA. 1985: 82-2: 258


[15] Hou P Y,  Oxid. Met., 1999, 52: 337.


[16] Hou P Y, Isumi T, Gleeson B. Submitted to Oxid Metals. 2008


[17] Felten E J.  Oxid. Met., 1976, 10: 23.


[18] Cadoret Y, Bacos M P, Josso P, Maurice V,Marcus P, Zanna S.  Mater. Sci. Forum. 2004, 461-464: 274.


[19] Hou P Y, McCarty K F.  Scr. Met., 2006, 54: 937.


[20] Hou P Y Special issue on Interface Science of Thermal Barrier Coatings,  J. Mater. Sci., 2008, DOI 10.1007/s10853-008-2969-3.


[21] Warnes B M, Punola D C.  Surf. Coat., Technol., 1997, 94-95: 1.


[22] Hou P Y, Tolpygo V K.  Surf. Coat., Technol., 2007, 202: 623.


[23] Meier S M, Nissley D M, Sheffler K D.  National Aeronautics and Space Administration, Cleveland, OH. 1991, Report vol. 189111


[24] Hou P Y. In: Hou PY, McNallan MJ, Oltra R, Opila EJ, Shores DA, eds. High Temperature Corrosion and Materials Chemistry,Pennington, PA: Electrochem. Soc., 1998: 198


[25] Hou P Y, Ackerman G D.  Appl. Surf. Sci., 2001, 178: 156.


[26] Molins R, Rouzou I, Hou P Y.  Oxid. Met., 2006, 65: 263.


[27] Molins R, Rouzou I, Remy L, Le Biavant-Guerrier K, Jomard F.  Mater. High Temp., 2005, 22: 359.


[28] Mendis B G, Tryon B, Pollock T M, Hemker K J.  Surf.Coat. Technol., 2006, 201: 3918.


[29] de Plessis J. 1990. Surface segregation.  Diffusion and Defect Data.Part B: Solid State Phenomena. Brookfield, VT: Sci-Tech Publ, 11: 22-32


[30] Uebing C.  Prog. Surf. Sci., 1996, 53: 297.


[31] Hou P Y.  Mater. Corros., 2000, 51: 329.


[32] Sigler D R.  Oxid. Met., 1989, 32: 337.


[33] Qin F, Jiang C, Anderegg J W, Jenks C J, Gleeson B, Sordelet D J Thiel P A.  Surf. Sci., 2007, 601: 376.


[34] Gauffier A, Saiz E, Tomsia A P, Hou PY.  J. Mater. Sci., 2007, 42: 9524.


[35] Grabke H J.  Steel. Res., 1986, 57: 178.


[36] Bradley J R, Aaronson H I, Russell K C, Johnson W C.  Metall., Trans., 1977, 8A: 1955.


[37] LejEek P, Krajnikov A V, Ivashchenko YuN, Militzer M,Adamek J.  Surf. Sci., 1993, 280: 325.


[38] Nikolaeva A V, Nikolaev YuA, Kevorkyan YuR. Atom. Energy, 2001, 91: 2325.


[39] Viefhaus H, Richarz B.  Mater. Corros., 1995, 46: 306.


[40] Hong S H, Kang S J, Yoon, D N, Baek W H.  Metall. Trans., 1991, 22A: 2969.