| [1] Yuan J, Tsujikawa S. Characterization of sol-gel-derived TiO2 coatings and their photoeffects on copper substrates [J]. Electrochem. Soc., 1995, 142(34): 44-50 [2] Park H, Kim K Y, Choi W. Photoelectrochemical approach for metal corrosion prevention using a semiconductor photoanode [J]. Phys. Chem., 2002, 106(47)B: 75-81 [3] Li J, Lin C J, Li J T, et al. A photoelectrochemical study of CdS modified TiO2 nanotube arrays as photoanodes for cathodic protection of stainless steel[J]. Thin Solid Films, 2011, 519(54): 94-502 [4] Uhlig H H. Corrosion and Corrosion Control [M]. Wiley & New York: Sons, 1963 [5] Raghavan S, Sameer D, Sudipta S, et al. Evaluation of the performance of TiO2-CeO2 bilayer coatings as photoanodes for corrosion protection of copper[J]. Electrochem. Solid State Lett., 2006, 9(1)B: 1-4 [6] Park H, Kim K Y, Choi W. Photoelectrochemical approach for metal corrosion prevention using a semiconductor photoanode[J]. J. Phys. Chem., 2002, 106(47)B: 75-81 [7] Li M, Luo S, Wu P, et al. Photocathodic protection effect of TiO2 films for carbon steel in 3% NaCl solutions[J]. Electrochim. Acta, 2005, 50(34): 1-6 [8] Shen G X, Chen Y C, Li J, et al. Preparation of the TiO2-SnO2 composite films and its function of photogenerated cathodic protection of 316L stainless steel[J]. 2006, 26(2): 109-114 (沈广霞, 陈艺聪 ,李静等. 纳米TiO2-SnO2复合薄膜的光生阴极保护作用及机理研究[J]. 中国腐蚀与防护学报, 2006, 26(2): 109-114 [9] Wu P F, Li M C, Shen J N, et al. Photo-electrochemical anticorrosion effect of anodic TiO2 films[J]. J. Chin. Soc. Corros. Prot., 2005, 25(1): 53-56 (武朋飞, 李谋成, 沈嘉年等. 阳极氧化二氧化钛薄膜的光电化学防腐蚀特性[J]. 中国腐蚀与防护学报, 2005, 25(1): 53-56) [10] Yang B Q, Li J, Du B Z. Current situation of carbon nanotubes modified electrode [J]. Anal. Instrum., 2008, 38(5): 1-4 (杨百勤, 李靖, 杜宝中. 碳纳米管修饰电极的现状[J]. 分析仪器, 2008, 38(5): 1-4) [11] Wang Z H, Dong X Y, Li J. An inlaying ultra thin carbon paste electrode modified with functional single wall carbon nanotubes for simultaneous determination of three purine derivatives [J]. Sens Actuat B: Chem, 2008, 131(2): 411-416 [12] Odaci D, Telefocu A, Timur S. Pyranose oxidase biosensor based on carbon nanotube (CNT)-modified carbon paste electrodes[J]. Sens Actuat B: Chem., 2008, 132(1): 159-165 [13] Zheng L, Song J F. Curcumin multi-wall carbon nanotubes modified glassy carbon electrode and its electrocatalytic activity towards oxidation of hydrazine[J]. Sens Actuat B: Chem., 2009, 135(2): 650-655 [14] Jiang G, Lin Z, Zhu L, et al. Preparation and photoelectrocatalytic properties of titania/carbon nanotube composite flms [J]. Carbon, 2010, 48(33): 69-75 [15] Liu W, Wang Y, Cao L, et al. The effect of corporating carbon nanotubes in titania films used for the photocathode protection of 304 stainless steel[J]. Carbon, 2012; 50: 3641-3648 [16] Jiang L C, Zhang W D. Charge transfer properties and photoelectrocatalytic activity of TiO2/MWCNT hybrid [J]. Electrochim, Acta, 2010, 56(4): 06-11 [17] Jitianu A, Cacciaguerra T, Benoit R, et al. Synthesis and characterization of carbon nanotubes-TiO2 nanocomposites [J]. Carbon, 2004, 42(11): 47-51 |
