Please wait a minute...
J Chin Soc Corr Pro  1990, Vol. 10 Issue (1): 85-88    DOI:
Current Issue | Archive | Adv Search |
THE CORROSION BEHAVIOR OF Ta,Cr COATING ION BEAM MIXING SURFACE OF GCr15 BEARING STEEL
Ma Zongfu Weng Jie Gou Chenglin (Sichuan University)
Download:  PDF(777KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Mixing of Ta coating with Xe~+ or mixing of Cr coating with Ar~+ ions implantation in GCr15 bearing steel was studied.In the Ta-mix- ing case,about 6×10~(16) ions/cm~2 a dose was enough to make an amor- phous layer,and anodic polarization tests in chloric acid showed that the corrosion current was suppressed by nearly two orders.In the Cr-mixing case,a Cr_2 O_3 phase dominated layer was formed and the Cr/Fe ratio was measured after immersion test in FeCl_3.The Cr concentration decreased abruptly inside as compared with that of out- side of the pit.
Received:  25 February 1990     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

Cite this article: 

Ma Zongfu Weng Jie Gou Chenglin (Sichuan University). THE CORROSION BEHAVIOR OF Ta,Cr COATING ION BEAM MIXING SURFACE OF GCr15 BEARING STEEL. J Chin Soc Corr Pro, 1990, 10(1): 85-88.

URL: 

https://www.jcscp.org/EN/     OR     https://www.jcscp.org/EN/Y1990/V10/I1/85

[1] Ferber,H.,et al.,Mater.Sci.Eng.,69,261~267(1985)
[2] Smidt,H.A.,Nucl.Instrum.Methods,,B10/11,532~538(1985)
[3] 周佩德等,中国腐蚀与防护学报,3,151~157(1983)
[4] 柳襄怀等,中国腐蚀与防护学报,5,228~232(1985)
No related articles found!
No Suggested Reading articles found!