Metal Dusting-Mechanisms and Preventions

中国腐蚀与防护学报

2009, Vol. 29

Issue (4): 262-276

研究报告

本期目录 | 过刊浏览

Metal Dusting-Mechanisms and Preventions

J. Q. ZHANG; D. J. YOUNG

School of Materials Science and Engineering; University of New South Wales; Sydney; NSW 2052; Australia

全文: PDF(9107 KB)

摘要:

Metaldusting attacks iron, low and high alloy steels and nickel-or cobalt-base alloys by disintegrating bulk metals and alloys into metal particles in a coke deposit. It occurs in strongly carburising gas atmospheres (carbon activity a_C>1) at elevated temperatures (400 ℃~1000 ℃). This phenomenon has been studied for decades, but the detailed mechanism is still not well understood. Current methods of protection against metal dusting are either directed to the process conditions-temperature and gas composition-or to the development of a dense adherent oxide layer on the surface of the alloy by selective oxidation. However, metal dusting still occurs by carbon dissolving in the base metal via defects in the oxide scale. The research work at UNSW is aimed at determining the detailed mechanism of metal dusting of both ferritic and austenitic alloys, in particular the microprocesses of graphite deposition, nanoparticle formation and underlying metal destruction. This work was carried out using surface observation, cross-section analysis by focused ion beam and electron microscopic examination of coke deposits at different stages of the reaction. It was found that surface orientation affected carbon deposition and metal dusting at the initial stage of the reaction. Metal dusting occurred only when graphite grew into the metal interior where the volume expansion is responsible for metal disintegration and dusting. It was also found that the metal dusting process could be significantly changed by alterations in alloy chemistry. Germanium was found to affect the iron dusting process by destabilising Fe₃C but increasing the rate of carbon deposition and dusting, which questions the role of cementite in ferritic alloy dusting. Whilst adding copper to iron did not change the carburisation kinetics, cementite formation and coke morphology, copper alloying reduced nickel and nickel-base alloy dusting rates significantly. Application of these fundamental results to the dusting behaviour of engineering alloys is discussed.

关键词 ： metal dusting, iron, nickel, mechanism, cementite, copper alloying

收稿日期: 2009-06-10

通讯作者: J.Q. Zhang E-mail: J.Q.Zhang@unsw.edu.au

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	Jianqiang Zhang
44.8K

引用本文:

J. Q. ZHANG D. J. YOUNG. Metal Dusting-Mechanisms and Preventions[J]. 中国腐蚀与防护学报, 2009, 29(4): 262-276.

链接本文:

https://www.jcscp.org/CN/Y2009/V29/I4/262

[1] Hochman R F. Proceedings of the Materials Engineering and Sciences Division Biennial Conference. AIChE, 1970, 48: 401.
[2] Grabke H J, Krajak R, Nava Paz J C. Corros. Sci., 1993, 35: 1141.
[3] Grabke H J. Mater. Corros., 1998, 49: 303.
[4] Pippel E, Woltersdorf J, Schneider R. Mater. Corros., 1998, 49: 309.
[5] Chun C M, Ramanarayanan T A, Mumford J D.Mater. Corros., 1999, 50: 634.
[6] Zeng Z, Natesan K, Maroni V A. Oxid. Met., 2002, 58: 147.
[7] Toh C H, Munroe P R, Young D J. Oxid. Met., 2002, 58: 1.
[8] Toh C H, Munroe P R, Young D J, Foger K.Mater. High Temp., 2003, 20: 129.
[9] Toh C, Munroe P R, Young D J. Mater. High Temp., 2003, 20: 527.
[10] Zhang J, Schneider A, Inden G. Corros. Sci., 2003, 45: 1329.
[11] Zhang J, Schneider A, Inden G. Mater. Corros., 2003, 54: 770.
[12] Zhang J, Schneider A, Inden G. Corros. Sci., 2003, 45: 281.
[13] Zhang J, Schneider A, Inden G. Mater. Corros., 2003, 54: 763.
[14] Zhang J, Schneider A, Inden G J. Corros.Sci. Eng., 2003, 6: H057
[15] Koszman I. Proceedings of the Symposium on High Temperature Gas-Metal Reactions in Mixed Environments. Boston, Massachusetts, 1972: 155.
[16] Schneider A, Grabke H J. Mater. Corros., 2003, 54: 793.
[17] Schneider A, Viefhaus H, Inden G. Mater. Corros., 2000, 51: 338.
[18] Zhang J. Ostrovski O. ISIJ Int. 2001, 41: 340.
[19] Schneider A, Zhang J. Mater. Corros., 2003, 54: 778.
[20] Schneider A, Zhang J, Inden G. J. Corros.Sci. Eng., 2003, 6: H043.
[21] Motin M A A, Munroe P R, Brady M P, Young D J. Scr. Mater., 2007, 56: 281.
[22] Zhang J, Schneider A, Inden G. Corros. Sci., 2008, 50: 1020.
[23] Zhang J, Munroe P, Young D J. Acta Mater., 2008, 56: 68.
[24] Zhang J, Young D J. Corros. Sci., 2007, 49: 1496.
[25] Zhang J, Young D J. Oxid. Met., 2008, 70: 189.
[26] Zhang J, Young D J. Corrosion Controll 007,Sydney: Darling Harbour, 2007: 11
[27] Motin M A A, Zhang J, Munroe P R, Brady M. P, Young D J.Corrosion Controll 007, Sydney: Darling Harbour, 2007: 11
[28] Zhang J, Young D J. 16th International Corrosion Congress, Beijing. 2005:
[29] Zhang J, Cole D M I, Young D J. Mater. Corros., 2005, 56: 756.
[30] Zhang J, Young D J. ECS Trans., 2007, 3(14): 27.
[31] Zhang J, Safarzadeh M, Young D J. Oxid. Met., 2008,70: 15.
[32] Zhang J, Young D J. Corros. Sci., 2007: 49: 1450.
[33] Zhang J, Young D J. Corrosion & Prevention, Hobart,Tasmania; 2006: 11
[34] Zhang J, Young D J. 14th Asian-Pacific Corrosion Control Conference, Shanghai, 2006: 10
[35] Gokcen N A. J. Am. Chem. Soc. 1951, 73: 3789.
[36] Kehrer V J, Leidheiser H Jr. J. Phys. Chem. 1954, 58: 550.
[37] Shelton J C, Palit H R, Blakely J M. Surf. Sci. 1974, 43: 493.
[38] Wei Q, Pippel E, Woltersdorf J, et al. Mater. Corros., 2000, 51: 652.
[39] Pippel E, Woltersdorf J, Grabke H J. Mater.Corros., 2003, 54: 747.
[40] Chun C M, Mumford J D, Ramanarayanan T A,J. Electrochem. Soc., 2000, 147: 3680.

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed