Please wait a minute...
中国腐蚀与防护学报  1981, Vol. 1 Issue (2): 53-61    
  研究报告 本期目录 | 过刊浏览 |
Ag/AgCl高温参考电极的试制
金兆法;刘华堂;周锦义
一机部通用机械研究所;一机部通用机械研究所;一机部通用机械研究所
Preparation of Ag/Agcl Reference Electrode for High Temperature Usage
Jin Zhaofa Liu Huatang Zhou Jinyi
全文: PDF(658 KB)  
摘要: 作者研制并测定了 Ag/AgCl(0.1NKCl)电极在25—200℃范围内的电极电位。Ag/AgCl 电极在高温情况下性能稳定、可逆性良好、可作为高温下的参考电极.
Abstract:The authors developed and measured electrode Potential of Ag/AgC1(0.1 NKC1)electrode in the range of 25—200℃。 The Ag/AgC1 electrode has stable Performance and good reversibility and can be used as reference electrode in high temperature.
收稿日期: 1981-04-25     

引用本文:

金兆法;刘华堂;周锦义. Ag/AgCl高温参考电极的试制[J]. 中国腐蚀与防护学报, 1981, 1(2): 53-61.
. Preparation of Ag/Agcl Reference Electrode for High Temperature Usage. J Chin Soc Corr Pro, 1981, 1(2): 53-61.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1981/V1/I2/53

[1] A.L.Bacarella and A.L.Sutton J.Electrohem Soc;Vol.112,546(1965)
[2] B.E.Wilde,Corrosion,Vol 23,331(1967)
[3] R.S.Greeley and W.T.Smith,R.W.Stoughton,M.H.Lietzke,J.Phys Chem.,Vol.64,652(1960)
[4] R.L.Cowan and A.I.Kaznoff,Corrosion Vol.29,123(1973)
[5] R.A.Legault and J.E.Draley,Corrosion Vol.23,365(1967)
[6] M.E.Indig and D.A.Vermilyyea,Corrosion Vol.27,312(1971)
[7] R.D.Jonge F.X.C.M.Barake J.D.Logeman Chemical Age of lndia Vol.26(4) ,249-260(1975)
[8] 金属学报 Vol.12,No.2,140(1976)
[9] D.D.Jones,H.G.Mastuson Advances in Corrosion Science and Technology Vol.1,1(1970)
[10] D.D.Macdonald,Modern Aspects of Electrochemistry Vol.11,141(1975)
[11] D.D.Macdonald,Corrosion Sci.,Vol.13,259(1973)
[12] D.D.Macdonald,J.Electrochem Soc,Vol.120,317(1973)
[13] D.D.Macdonald,Electrochem Acta,Vol.21,169(1976)
[14] D.D.Macdonald,Corrosion,Vol.34,75(1978)
[15] G.J.Janzand F.J.Kelley The Encyclopedia of Electrochemistry,Hampel,C.A,Editor,Reinhold Publishing Co,Newyork,1013(1964)
[16] De Bethume,A.J.The Encyclopedia of Electrochemistry,Hampel,C.A,Editor,Reinhold Publishing Co,Newyork,433(1964)
[17] Annual Book of ASTM Standards 1033(1971)
[18] L.L.Shreir Corrosion,Vol.2 Newnes-Butterworths,(1965) ;Second impression,21:29
[19] A.J.Debethune,T.S.Licht and N.Swendeman J.Electrochem.Soc,Vol.106,616(1959)
[20] M.J.Danielson,Corrosion Vol.35,200(1979)
[21] H.Levin and C.Bonilla J.Electrochem.Soc.,Vol.98,388(1951)
[22] A.S.Mckie,High Temperature High Pressure Electrochemistry in Aqueous Solution,NACE,Houston,Teaxs,(1976)
[23] D.A.Vermilyyea and M.E.Indig,J.Electrochem.Soc.,Vol.119,39(1972)
[24] Ernest Yeager and A.J.Salkind Techniques of Electrochemietry Wiley Lntesscience,a Division of John Wiley & Sons.Inc.Vol.1,37-38(1972)
[25] D.D.Macdonald,Corrosion Vol.34,No.3,75-84(1978)
[26] M.H.Lietzke and Vanghen J.Amer.Chem.Soc.,Vol.77,876(1955)
[27] 湖南大学化学系金属防腐专业教研室编“电镀工艺实验参考资料”258(1975)
No related articles found!