少量金属元素对Al—Zn共晶合金钎焊点抗腐蚀性能的影响

中国腐蚀与防护学报

1982, Vol. 2

Issue (2): 59-63

研究报告

本期目录 | 过刊浏览

少量金属元素对Al—Zn共晶合金钎焊点抗腐蚀性能的影响

韩万书;林千善;刘玉生;张启运

北京大学化学系;北京大学化学系;北京大学化学系;北京大学化学系

THE EFFECT OF SMALL-AMOUNT OF METAL ADDITIONS ON THE CORROSION RESISTANCE OF Al-Zn FILETS ON THE ALLUMINUM BASE METALS

Han Wanshu Lin Qianshan Liu Yusheng and Zhang Qiyun(Beijing University)

全文: PDF(862 KB)

摘要: 用经典失重法和显微结构法研究了20个少量添加元素对纯铝及LY-12母材上Al-Zn钎料焊点抗腐蚀性能的影响。发现添加少量碱土金属或稀土金属能有效地提高焊点的抗腐蚀性。少量重金属Bi,Sn,Pb,Cd,Tl,Cu,Ni及Ga等引起合金强烈的晶间腐蚀。过渡金属及碱金属影响不大。

Abstract：A study has been made of the effects of twenty metal additions in small amount on the corrosion resistance in 3% NaCl solution of Al-Zn euteetic fillets on pure aluminum as well as on LY12 (2024) base metals as determined by weight loss and by metallographic technique. It is shown that corrosion resistance effectively increses with the addition of small amounts of alkaline earth and rare earth elements, such as Be, Mg, Sr and La. The addition of heavy metals, such as Bi, Sn, Pb, Cd, Tl, Cu, Ni and Ga causes serious intercrystalline corrosion in the fillets. Less effective are the additions of transition metals and alkali metals.

收稿日期: 1982-04-25

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	韩万书
	林千善
	刘玉生
	张启运
44.8K

引用本文:

韩万书;林千善;刘玉生;张启运. 少量金属元素对Al—Zn共晶合金钎焊点抗腐蚀性能的影响[J]. 中国腐蚀与防护学报, 1982, 2(2): 59-63.
. THE EFFECT OF SMALL-AMOUNT OF METAL ADDITIONS ON THE CORROSION RESISTANCE OF Al-Zn FILETS ON THE ALLUMINUM BASE METALS. J Chin Soc Corr Pro, 1982, 2(2): 59-63.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1982/V2/I2/59

[1] Hansen, M., Constitution of Binary Alloys, McGraw-Hill Book Co., New York, 2nd ed., 148(1958)
[2] 田中润,田口稔孙,西掘义弘,日本特许昭47-11888(1972)
[3] Schoer, H., Schultze, W., U. S. Pat. 3, 807,033(1974)
[4] Roberts, S., J. Inst. Metals, 81, 6, 301(1952/53)
[5] Masing, G., Moldehnke-Hohmann, G., Zeitschr. Metallkunde, 42, 1, 19(1951)
[6] 张启运,郑朝贵,刘淑祺,金属学报 15,1,109(1979)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed