熔盐膜电解渗涂

中国腐蚀与防护学报

1989, Vol. 9

Issue (2): 103-112

研究报告

本期目录 | 过刊浏览

熔盐膜电解渗涂

何业东;朱日彰;张文奇;于维平;张莉芳;马信清

北京科技大学;北京科技大学;北京科技大学;北京航空航天大学;北京航空航天大学;北京航空航天大学

MODIFIED METALLIDING FROM THE MOLTEN SALT FILM

He Yedong Zhu Rizhang Zhang Wenqi(Beijing University of Science and Technology) Yu Weiping Zhang Lifang and Ma Xinqing(Beijing University of Aeronautics and Astronautics)

全文: PDF(794 KB)

摘要: 熔盐膜电解渗涂采用微型电解池,有利于克服熔盐浴电解渗涂的某些缺点。熔盐膜盐铝有三种类型:阳极不可溶;阳极可以提供铝;无电解渗铝。熔盐中的歧化反应3AlCl AlCl_3+2Al实际上是电极反应的后置转换反应,在渗涂过程中起提供铝原子的作用。熔盐膜是一种由液、固两组成的分散体系,对流受到限制,传质仅依靠扩散和电迁移。电解过程受浓差控制,电极易极化,有利于多元共渗。已实现Al～Cr、Al-Si、Al-Mn、Al-Ce、Al-Y共渗。

Abstract：The modified metalliding cell from molten salt film consists of three parts namely, cathode, anode and salt film. The sample is cathode, the graphite powder or metal powder is anode, and the salt film is composed of Al_2O_3 powder, salt and an inorganic adhesion agent. They are all fixed in a stainless steel container. Metal!iding was then processed in a furnace. In this way the electrolytic cell can he made smaller, so that some disadvantageous aspects of ordinary metalliding from fused salt bath can be overcome. There are three types of aluminium impregation by the present technique: (a)the anode is not soluble, (b)the anode can supply aluminium, (e)electroless. The disproportionatio reaction: 3AlCl AlCl_3+2Al went after the electrode reaction supplies aluminium atoms. The film is a dispersal system composed of solid and liquid phases. The mass transport in the film depends on diffusion and ionic mobility. Cathodi polarization makes codeposition easier. Coatings of Al, Al-Cr, Al-Si, Al-Mn, Al-Ce and Al-Y have been attainedby this method.

收稿日期: 1989-04-25

基金资助:国家科学基金

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	何业东
	朱日彰
	张文奇
	于维平
	张莉芳
	马信清
44.8K

引用本文:

何业东;朱日彰;张文奇;于维平;张莉芳;马信清. 熔盐膜电解渗涂[J]. 中国腐蚀与防护学报, 1989, 9(2): 103-112.
. MODIFIED METALLIDING FROM THE MOLTEN SALT FILM. J Chin Soc Corr Pro, 1989, 9(2): 103-112.

链接本文:

https://www.jcscp.org/CN/ 或 https://www.jcscp.org/CN/Y1989/V9/I2/103

[1] 美国国家材料咨询委员会所属涂层委员会编,金石译,《高温抗氧化涂层》,科学出版社,392(1980)
[2] 马樟源等,中国腐蚀与防护学报,2(3) ,47(1982)
[3] 邱竹贤《铝冶金物理化学》,上海科学技术出版社,228(1985)
[4] 同(3) .p243
[5] Levine, S. R. and Caves, R. M., J. Electrochem. Soc. 121(8) , 1051(1974)
[6] 沈时英,胡方华编译,《熔盐电化学理论基础》,中国工业出版社362(1965)
[7] 查全性,《电极过程动力学导论》,科学出版社,153(1976)
[8] 同(7) P180
[9] 同(1) ,P104
[10] Fiedler, H. C. and Sieraki, R. J., NASACR 120871, (1971)
[11] Huang, Z. X., He, Y. D. and Shih, S. T., 9th International Congress on Metallic Corrosion, TORONTO, 2, 495(1984)
[12] 石声泰,中国腐蚀与防护学报,1(3) ,1(1981)
[13] Walsh, P. N., Chemical Vapor Deposition, The Electrochemical Society, Princeton, N. J., 147(1973)

No related articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed