Please wait a minute...
Just Accepted | Current Issue | Archive | Featured Articles | Special Issue | Most Read | Most Downloaded | Most Cited
Journal of Chinese Society for Corrosion and protection  2019, Vol. 39 Issue (5): 404-410    DOI: 10.11902/1005.4537.2019.174
Current Issue | Archive | Adv Search |
Interaction between Friction-wear and Corrosion in Special Environment
CHEN Jiachen,WANG Zhongwei,QIAO Lijie,YAN Yu()
Beijing Advanced Innovation Center for Materials Genome Engineering, Corrosion and Protection Center, Institute of Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China
Download:  HTML  PDF(804KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

The interaction of mechanical friction-wear and electrochemical corrosion in biological environments is named as bio-tribocorrosion. Due to large bio molecules in the surrounding environment, the adsorption of such molecules has great influence on the tribocorrosion behaviour of implant materials. In terms of the influence of bio-tribocorrosion, both the artificial joint implants and dental implants encounters obviously issues of bio-tribocorrosion. In this paper, we summarized the current status of research on bio-tribocorrosion with the emphasis on the mechanisms of relevant processes and the effect of bio-tribocorrosion on the surface microstructure of implants. It is noted that to choose proper testing methods is a very important matter for assessing the bio-tribocorrosion process. Besides, the future trend and directions of research in this area are also put forward.
Key words:  tribology      corrosion      artificial joint      nanocrystalline      biofilm     
Received:  29 September 2019     
ZTFLH:  TQ174  
Fund: National Natural Science Foundation of China(U1660104)
Corresponding Authors:  Yu YAN     E-mail:  yanyu@ustb.edu.cn
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
（）
Articles by authors
Jiachen CHEN
Zhongwei WANG
Lijie QIAO
Yu YAN

Cite this article: 

CHEN Jiachen,WANG Zhongwei,QIAO Lijie,YAN Yu. Interaction between Friction-wear and Corrosion in Special Environment. Journal of Chinese Society for Corrosion and protection, 2019, 39(5): 404-410.

URL: 

https://www.jcscp.org/EN/10.11902/1005.4537.2019.174     OR     https://www.jcscp.org/EN/Y2019/V39/I5/404

Fig.1  Factors that may interact with corrosion in abrasion reaction
Contact stateRelated reaction
Contact load and form

1. Contact pressure (surface and subsurface) and contact area

2. Elastic or elastic-plastic or complete plastic reactions on surfaces and subsurfaces

3. Surface deformation (elastic or permanent deformation)

Relative motion under loading conditions (causing wear in corrosive environments)

1. Depassivation of passivated surfaces

2. Corrosion potential (mixed potential of wear and non-wear area)

3. Causing phase transition on the surface or near the surface

4. Repassivation kinetics

5. Local mass transfer acceleration

6. Increase in contact temperature

7. Increase in roughness and corresponding area

8. Change of surface composition

9. Formation of a mechanical mixing layer, which may contain debris

10. Wear area and the non-wear area constitute a couple pair

11. Cause surface hardening

12. Affects the shear strength of rough/rough surface joints and causes adhesion

Changing load in dynamic contact

1. Self-corrosion potential

2. Local current density

3. Area of active anode and anode site position[4]

4. Surface recovery time

5. Change the wear mechanism or wear rate

Frictionr- corrosion

1. Effect of friction

2. Local environmental pH

3. Total surface loss (mechanical and electrochemical)

Wear debrisResulting metal abrasives corrode in the environment causing secondary release of ions
Table 1  Influencing factors of corrosion/surface
Fig.2  Curves of open circuit potential and friction coefficient of cobalt-chromium-molybdenum alloy in calf joint synovial fluid with time
1 FischerA, MischlerS. Tribocorrosion: Fundamentals, materials and applications [J]. J. Phys. D:Appl. Phys., 2006, 39(15): 1832
2 CelisJ P, PonthiauxP. Tribocorrosion [J]. Wear, 2006, 261(9): 937
3 WoodR. Tribocorrosion of coatings: A review [J]. J. Phys. D:Appl. Phys., 2007, 40(18): 5502
4 KokY N, AkidR, HovsepianP E. Tribocorrosion testing of stainless steel (SS) and PVD coated SS using a modified scanning reference electrode technique [J]. Wear, 2005, 259(7): 1472
5 MadsenB W. ASTM G119-93. Annual book of ASTM standards [S]. 1994, 3507
6 VignalV, MaryN, PonthiauxP, et al. Influence of friction on the local mechanical and electrochemical behaviour of duplex stainless steels [J]. Wear, 2006, 261(9): 947
7 CelisJ P, PonthiauxP, WengerF. Tribo-corrosion of materials: Interplay between chemical, electrochemical, and mechanical reactivity of surfaces [J]. Wear, 2006, 261(9): 939
8 MatsumuraM. Erosion-corrosion of metallic materials in slurries [J]. Corros. Rev., 1994, 12(3): 321
9 GlaeserW, WrightI G. Mechanically Assisted Degradation [M]. Washington D.C.: ASM Handbook., 1986, 9: 136
10 MalkaR, Ne?i?S, GulinoD A. Erosion-corrosion and synergistic effects in disturbed liquid-particle flow [J]. Wear, 2007, 262(7): 791
11 StackM M, El BadiaT M A. Mapping erosion-corrosion of WC/Co-Cr based composite coatings: Particle velocity and applied potential effects [J]. Surf. Coat. Technol., 2006, 201(3): 1335
12 WoodR J K. Erosion-corrosion synergism for multi-phase flowline materials [J]. La Houille Blanche, 1992, 7/8: 605
13 WoodR J K. Erosion-corrosion interactions and their effect on marine and offshore materials [J]. Wear, 2006, 261(9): 1012
14 WoodR J K. Erosion-corrosion Comprehensive Structural Integrity [M]. Oxford: Elsevier, 2007
15 WoodR J K. Challenges of living with erosion-corrosion [A]. Proceedings of the 2nd International Symposium on Advanced Materials for Fluid Machinery [C]. London:2004: 113
16 CelisJ P, PonthiauxP, WengerF. Tribo-corrosion of materials: Interplay between chemical, electrochemical, and mechanical reactivity of surfaces [J]. Wear, 2006, 261(9): 939
17 LandoltD. Electrochemical and materials aspects of tribocorrosion systems [J]. J. Phys. D:Appl. Phys., 2006, 39(15): 3121
18 WoodR J K, PugetY, TretheweyK R, et al. The performance of marine coatings and pipe materials under fluid-borne sand erosion [J]. Wear, 1998, 209: 16
19 WoodR J K, HuttonS P. The synergistic effect of erosion and corrosion: Trends in published results [J]. Wear, 1990, 140(2): 387
20 StackM M, ZhouS, NewmanR C. Identification of transitions in erosion-corrosion regimes in aqueous environments [J]. Wear, 1995, 186: 523
21 NaerheimY, KendigM W. The influence of electrochemical potential on wear [J]. Wear, 1985, 104(2): 139
22 StempM, MischlerS, LandoltD. The effect of mechanical and electrochemical parameters on the tribo-corrosion rate of stainless steel in sulphuric acid [J]. Wear, 2003, 255: 466
23 MischlerS, SpiegelA, LandoltD. The role of passive oxide films on the degradation of steel in tribocorrosion systems [J]. Wear, 1999, 225:1078
24 PonthiauxP, WengerF, DreesD, et al. Electrochemical techniques for studying tribocorrosion processes [J]. Wear, 2004, 256(5): 459
25 GarcíaI, DreesD, CelisJ P. Corrosion-wear of passivating materials in sliding contacts based on a concept of active wear track area [J]. Wear, 2001, 249(5): 452
26 GoldbergJ R, GilbertJ L. Electrochemical response of CoCrMo to high-speed fracture of its metal oxide using an electrochemical scratch test method [J]. J. Biomed. Mater. Res., 1997, 37(3)A421
27 MischlerS, DebaudS, LandoltD. Wear‐accelerated corrosion of passive metals in tribocorrosion systems [J]. J. Electrochem. Soc., 1998, 145(3): 750
28 JiangJ, StackM M, NevilleA. Modelling the tribo-corrosion interaction in aqueous sliding conditions [J]. Tribol. Int., 2002, 35(10): 669
29 JiangJ, StackM M. Modelling sliding wear: From dry to wet environments [J]. Wear, 2006, 261(9): 954
30 BozziniB, RicottiM E, BoniardiM, et al. Evaluation of erosion–corrosion in multiphase flow via CFD and experimental analysis [J]. Wear, 2003, 255(1): 237
31 BüscherR, T?gerG, DudzinskiW, et al. Subsurface microstructure of metal‐on‐metal hip joints and its relationship to wear particle generation [J]. J. Biomed. Mater. Res., 2005, 72(1)B206
32 ZhangH W, HeiZ K, LiuG, et al. Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment [J]. Acta Mater., 2003, 51(7): 1871
33 TaoN R, WangZ B, TongW P, et al. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment [J]. Acta Mater., 2002, 50(18): 4603
34 LuK, LuJ. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment [J]. Mater. Sci. Eng., 2004, A375: 38>
35 BidivilleA, FaveroM, StadelmannP, et al. Effect of surface chemistry on the mechanical response of metals in sliding tribocorrosion systems [J]. Wear, 2007, 263: 207
36 LiuX C, ZhangH W, LuK. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel [J]. Science, 2013, 342: 337
37 ChenJ, LuL, LuK. Hardness and strain rate sensitivity of nanocrystalline Cu [J]. Scr. Mater., 2006, 54(11): 1913
38 YanY, NevilleA, DowsonD. Biotribocorrosion-an appraisal of the time dependence of wear and corrosion interactions: I. The role of corrosion [J]. J. Phys. DAppl. Phys., 2006, 39(15): 3200
39 WangZ, YanY, SuY, et al. Effect of proteins on the surface microstructure evolution of a CoCrMo alloy in bio-tribocorrosion processes [J]. Colloid. Surf. B-Biointerfaces, 2016, 145: 176
40 LiaoY, PourzalR, WimmerM A, et al. Graphitic tribological layers in metal-on-metal hip replacements [J]. Science, 2011, 334(6063): 1687
41 YanY, NevilleA, DowsonD. Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments [J]. Wear, 2007, 263(7): 1105
42 YanY, DowsonD, NevilleA. In-situ electrochemical study of interaction of tribology and corrosion in artificial hip prosthesis simulators [J]. J. Mech. Behav. Biomed. Mater., 2013, 18: 191
43 ZengP, RanaA , ThompsonR,et al. Subsurface characterization of wear on mechanically polished and electro-polished biomedical grade CoCrMo [J]. Wear, 2015, 332/333: 650
[1] ZHENG Li, WANG Meiting, YU Baoyi. Research Progress of Cold Spraying Coating Technology for Mg-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 22-28.
[2] WEI Zheng, MA Baoji, LI Long, LIU Xiaofeng, LI Hui. Effect of Ultrasonic Rolling Pretreatment on Corrosion Resistance of Micro-arc Oxidation Coating of Mg-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 117-124.
[3] YU Hongfei, SHAO Bo, ZHANG Yue, YANG Yange. Preparation and Properties of Zr-based Conversion Coating on 2A12 Al-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 101-109.
[4] HUANG Peng, GAO Rongjie, LIU Wenbin, YIN Xubao. Fabrication of Superamphiphobic Surface for Nickel-plate on Pipeline Steel by Salt Solution Etching and Its Anti-corrosion Properties[J]. 中国腐蚀与防护学报, 2021, 41(1): 96-100.
[5] DONG Xucheng, GUAN Fang, XU Liting, DUAN Jizhou, HOU Baorong. Progress on the Corrosion Mechanism of Sulfate-reducing Bacteria in Marine Environment on Metal Materials[J]. 中国腐蚀与防护学报, 2021, 41(1): 1-12.
[6] TANG Rongmao, ZHU Yichen, LIU Guangming, LIU Yongqiang, LIU Xin, PEI Feng. Gray Correlative Degree Analysis of Q235 Steel/conductive Concrete Corrosion in Three Typical Soil Environments[J]. 中国腐蚀与防护学报, 2021, 41(1): 110-116.
[7] HAN Yuetong, ZHANG Pengchao, SHI Jiefu, LI Ting, SUN Juncai. Surface Modification of TA1 Bipolar Plate for Proton Exchange Membrane Fuel Cell[J]. 中国腐蚀与防护学报, 2021, 41(1): 125-130.
[8] ZHANG Yuxuan, CHEN Cuiying, LIU Hongwei, LI Weihua. Research Progress on Mildew Induced Corrosion of Al-alloy[J]. 中国腐蚀与防护学报, 2021, 41(1): 13-21.
[9] RAN Dou, MENG Huimin, LIU Xing, LI Quande, GONG Xiufang, NI Rong, JIANG Ying, GONG Xianlong, DAI Jun, LONG Bin. Effect of pH on Corrosion Behavior of 14Cr12Ni3WMoV Stainless Steel in Chlorine-containing Solutions[J]. 中国腐蚀与防护学报, 2021, 41(1): 51-59.
[10] BAI Yunlong, SHEN Guoliang, QIN Qingyu, WEI Boxin, YU Changkun, XU Jin, SUN Cheng. Effect of Thiourea Imidazoline Quaternary Ammonium Salt Corrosion Inhibitor on Corrosion of X80 Pipeline Steel[J]. 中国腐蚀与防护学报, 2021, 41(1): 60-70.
[11] ZUO Yong, CAO Mingpeng, SHEN Miao, YANG Xinmei. Effect of Mg on Corrosion of 316H Stainless Steel in Molten Salts MgCl2-NaCl-KCl[J]. 中国腐蚀与防护学报, 2021, 41(1): 80-86.
[12] WANG Yating, WANG Kexu, GAO Pengxiang, LIU Ran, ZHAO Dishun, ZHAI Jianhua, QU Guanwei. Inhibition for Zn Corrosion by Starch Grafted Copolymer[J]. 中国腐蚀与防护学报, 2021, 41(1): 131-138.
[13] WANG Xintong, CHEN Xu, HAN Zhenze, LI Chengyuan, WANG Qishan. Stress Corrosion Cracking Behavior of 2205 Duplex Stainless Steel in 3.5%NaCl Solution with Sulfate Reducing Bacteria[J]. 中国腐蚀与防护学报, 2021, 41(1): 43-50.
[14] SHI Kunyu, WU Weijin, ZHANG Yi, WAN Yi, YU Chuanhao. Electrochemical Properties of Nb Coating on TC4 Substrate in Simulated Body Solution[J]. 中国腐蚀与防护学报, 2021, 41(1): 71-79.
[15] ZHANG Hao, DU Nan, ZHOU Wenjie, WANG Shuaixing, ZHAO Qing. Effect of Fe3+ on Pitting Corrosion of Stainless Steel in Simulated Seawater[J]. 中国腐蚀与防护学报, 2020, 40(6): 517-522.
No Suggested Reading articles found!

Copyright © 2017 Journal of Chinese Society for Corrosion and protection, All Rights Reserved.
Editorial Office: Journal of Chinese Society for Corrosion and Protection, 72 Wenhua Rd., Shenyang 110016, China
Tel: +86- 024-23971318, Fax: +86-024-23971819 　E-mail: jcscp@imr.ac.cn
Powered by Beijing Magtech