Please wait a minute...
中国腐蚀与防护学报  2011, Vol. 31 Issue (3): 219-224    
  研究报告 本期目录 | 过刊浏览 |
环烷酸与有机硫对Cr5Mo钢高温腐蚀的交互作用研究
董泽华1,何金杯1,郭兴蓬1,张耀享2,汉继成2
1. 华中科技大学化学与化工学院 武汉 430074
2. 中国石油兰州石化研究院 兰州 111003
HIGH TEMPERATURE INTERACTIVE CORROSION OF NAPHTHENIC ACID AND ORGANIC SULPHIDE ON Cr5Mo STEEL IN SYNTHETIC REFINING MIXTURE
DONG Zehua1, HE Jinbei1, GUO Xingpeng1,ZHANG Yaoxiang2, HAN Jicheng2
1. School of Chemistry, Huazhong University of Science and Technology, Wuhan 430074
2. PetroChina Lanzhou Petrochemical Company, Lanzhou 111003
全文: PDF(2031 KB)  
摘要: 以环烷酸、十二硫醇及白油组成的合成油模拟含酸含硫原油,采用旋转高压釜动态失重实验和微观分析手段,研究280℃下不同硫含量和环烷酸对Cr5Mo低合金钢腐蚀行为的交互影响。研究表明,当油中硫醇(以硫计算)含量<2 mass%时,硫化物含量上升会迅速增加环烷酸的腐蚀性;而当油中硫含量>3 mass%后,由于保护性 Fe7S8/Cr5S8膜的形成,其腐蚀加速性又显著降低;高酸值下(原油酸值(KOH)>15 mg/g),硫醇反而会抑制环烷酸腐蚀,酸值越高,硫醇对环烷酸腐蚀的抑制作用越强。研究还发现,二甲基亚砜含氧硫化物比硫醇对环烷酸腐蚀具有更强烈的抑制作用。
关键词 环烷酸有机硫Cr5Mo钢高温腐蚀交互作用    
Abstract:Naphthenic acid corrosion (NAC), sulfur corrosion (SC) and their interaction on Cr5Mo carbon steel were studied by mass loss test using a spinning coupon inside a heated autoclave at 280℃. The test mixture with different level of sulfur content and total acid number were prepared by pure naphthenic acid, lauryl mercaptan and low sulfur white oil. It was found that the increasing sulfur content can accelerate the NAC dramatically when the sulfur content lower than 2.0 mass%. However, the boost effect of mercaptan to NAC decreased quickly when the sulfur content is higher than 3.0 mass{\%}, which could be attributed to the formation of protective Fe7S8/Cr5S8 layer confirmed by scanning electron microscope(SEM), energy dispersive X-ray(EDX) analysis and X-ray diffraction(XRD) analysis. Surprisingly, high content of lauryl mercaptan could even inhibit the NAC in case of higher TAN  (>15.0 mg/g KOH), and the increasing content of TAN could enhance the inhibition of mercaptan on NAC. In contrast, the dimethyl sulfoxide(DMSO)exhibits stronger inhibition ability than mercaptan in case of high TAN in the test mixture.
Key wordsnaphthenic acid    organic sulfur    Cr5Mo steel    high temperature corrosion    interaction
收稿日期: 2010-03-10     
ZTFLH: 

TG174.4

 
基金资助:

中国石油天然气总公司兰州石化项目(20090411)资助

通讯作者: 董泽华     E-mail: zehua.dong@gmail.com
Corresponding author: DONG Zehua     E-mail: zehua.dong@gmail.com
作者简介: 董泽华,男,1968年生,副教授,研究方向为金属腐蚀与防护

引用本文:

董泽华,何金杯,郭兴蓬,张耀享,汉继成. 环烷酸与有机硫对Cr5Mo钢高温腐蚀的交互作用研究[J]. 中国腐蚀与防护学报, 2011, 31(3): 219-224.
DONG Ze-Hua. HIGH TEMPERATURE INTERACTIVE CORROSION OF NAPHTHENIC ACID AND ORGANIC SULPHIDE ON Cr5Mo STEEL IN SYNTHETIC REFINING MIXTURE. J Chin Soc Corr Pro, 2011, 31(3): 219-224.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2011/V31/I3/219

[1] Li Z Q, Ke W. Research and development on naphthenic acid corrosion in refinery [J]. Petrochem. Corros. Prot., 1999, 16(2): 1-5

    (李志强, 柯伟. 炼油厂环烷酸腐蚀研究与进展 [J]. 石油化工腐蚀与防护, 1999, 16(2): 1-5)

[2] Turnbull A, Slavcheva E, Shone B. Factors controlling naphthenic acid corrosion [J]. Corrosion, 1998, 54(11): 922-930

[3] Ke W, Chen J W. Development of corrosion research for petroleum processing industry [J]. Petrochem. Corros.Prot., 1997, 14(2): 1-11

    (柯伟, 陈进伟. 炼油工业中的腐蚀研究进展 [J]. 石油化工腐蚀与防护, 1997, 14(2): 1-11)

[4] Qu D R, Zheng Y G, Jing H M, et al. Erosion-corrosion of Q235 and 5Cr1/2Mo steels in oil with naphthenic acid and/or sulfur compound at high temperature [J]. Mater.Corros., 2005, 56(8): 533-541

[5] Hau J. Predicting sulfidic and naphthenic acid corrosion [J]. Corrosion, 2009, 65(12): 831-844

[6] Xu Z D, Shan S L. Corrosion and protection of refinery process units for processing sour crude [J]. Corros. Sci.Prot. Technol., 2004, 16(4): 250-252

    (徐志达, 单石灵. 加工含硫原油的设备腐蚀问题与对策 [J]. 腐蚀科学与防护技术, 2004, 16(4): 250-252)

[7] Yu F F, Li F, Gan F X. High temperature naphthenic acid corrosion of steel in high TAN refining media [J].Anti-Corros. Methods Mater., 2008, 55(5): 257-263

[8] Gao Y M, Chen J J, Gao L Q. Thermodynamic analysis of naphthenic acid hydrogen sulfide corrosion in oil distillation [J]. Corros. Sci. Prot. Technol.,2000, 12(2): 90-92

    (高延敏, 陈家坚, 高立群. 环烷酸和硫化氢体系的热力学分析 [J]. 腐蚀科学与防护技术, 2000, 12(2): 90-92)

[9] Zhang Y. Research on corrosivity of high-acidic and high-sulfur crude oils [J]. Petrochem. Corros. Prot.,2004, 21(6): 9-13

    (张昀. 高酸高硫原油腐蚀性研究 [J]. 石油化工腐蚀与防护, 2004, 21(6): 9-13)

[10] Craig H L. Temperature and velocity effects in naphthenic acid corrosion [A]. Corrosion/95 [C]. 1995, NACE: Houston, TX.

[11] Jing H M, Long K, Yan Y G, et al. Experiment unit for high-temperature and high-velocity erosion corrosion and research on the erosion of Cr5Mo steel in naphthenic acid [J].Petrochem. Corros. Prot., 1999, 16(3): 38-42

     (敬和民, 龙康, 阎永贵等. 高温高流速冲蚀实验装置及Cr5Mo钢在环烷酸中的冲蚀研究 [J]. 石油化工腐蚀与防护, 1999, 16(3): 38-42)

[12] Lv Z B, Tian S B, Zai Y C, et al. Progress on inhibitors and assess method for high temperature naphthenic acid corrosion [J]. Corros. Sci. Prot. Technol.,2004, 16(3): 151-154

     (吕振波, 田松柏, 翟玉春等. 高温环烷酸腐蚀抑制剂及评定方法的研究进展 [J]. 腐蚀科学与防护技术, 2004, 16(3): 151-154)

[13] Zhai Y H, Dong Z H, Mu J Y, et al. Corrosion of carbon steel and stainless steel in high temperature heavy oils [J]. Mater. Prot., 2006, 39(3): 52-54

     (翟云皓, 董泽华, 母建益等. 碳钢和不锈钢在高温重质油中的腐蚀行为 [J]. 材料保护, 2006, 39 (3): 52-54)

[14] Wu X Q, Jing H M, Zheng Y G, et al. Study on corrosion and erosion-corrosion behaviors of carbon steel in naphthenic acid mediums at high temperature [J]. J. Chin.Soc. Corros. Prot., 2002, 22(5): 257-262

     (吴欣强, 敬和民, 郑玉贵等. 碳钢在高温环烷酸介质中冲刷腐蚀行为 [J]. 中国腐蚀与防护学报, 2002, 22(5): 257-262)

[15] Okuno I, Latham D R, Haines W. Separation of sulfoxides from petroleum fractions by cation exchange resin chromatography [J]. Anal. Chem., 1967, 14(39): 1830

[16] Jing H M, Zheng Y G, Yao Z M, et al. Corrosion of naphthenic acid and control [J]. Petrochem. Corros.Prot., 1999, 16(1): 1-7

     (敬和民, 郑玉贵, 姚治铭等. 环烷酸腐蚀及其控制 [J]. 石油化工腐蚀与防护, 1999, 16(1): 1-7)

[17] Zhang Z G, Qian X M. Experimental study on thermal stability of DMS [J]. China Saf. Sci. J., 2006, 16(9): 100-104

     (张志刚, 钱新明. 二甲亚砜热稳定性的实验研究 [J]. 中国安全科学学报, 2006, 16(9): 100-104)

[18] Yepez O. Influence of different sulfur compounds on corrosion due to naphthenic acid [J]. Fuel, 2005, 84(1): 97-104

[19] Volmer-Uebing, Reynders M B, Stratmann M. Binding behaviour of organic monomers on iron surfaces and corrosion of the resultant chemically modified surfaces [J]. Mater.Corros., 1991, 42(1): 19-34

[20] Trasatti S P, Gabetta G. Study of naphthenic acid corrosion by neural network [J]. Corros. Eng. Sci. Technol.,2006, 41(3): 200-211
[1] 谢冬柏, 洪昊, 王文, 彭晓, 多树旺. 模拟燃烧环境介质和温度对不锈钢表面氧化物形态的影响研究[J]. 中国腐蚀与防护学报, 2020, 40(4): 358-366.
[2] 胡宗武, 刘建国, 邢蕊, 尹法波. 单相流条件下90°水平弯管冲刷腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 115-122.
[3] 余仁强,何建军,李微,任延杰,杨旺. 火电厂循环泵叶轮材料Cr30A在脱硫浆液腐蚀环境中的交互损伤失效行为研究[J]. 中国腐蚀与防护学报, 2019, 39(4): 353-358.
[4] 梁书源, 姜翠玉. 电厂燃油锅炉腐蚀机理及防腐添加剂研究进展[J]. 中国腐蚀与防护学报, 2018, 38(2): 105-116.
[5] 马双忱, 焦坤灵, 张立男, 孙尧, 吴文龙, 张小霓. 高温气相条件下硫酸氢铵与硫酸铵对20#碳钢的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2017, 37(6): 605-612.
[6] 张明明,辛丽,丁学勇,耿树江,朱圣龙,王福会. 600 ℃/NaCl-H2O-O2协同环境中Ti/TiAlN多层涂层的耐蚀行为[J]. 中国腐蚀与防护学报, 2017, 37(1): 29-35.
[7] 陶永奇,刘刚,黎业生,曾志翔. 海水环境下2024铝合金腐蚀磨损性能研究[J]. 中国腐蚀与防护学报, 2016, 36(6): 587-594.
[8] 李琰,鲁金涛,杨珍,朱明,谷月峰. 烟气S含量对700 ℃超超临界锅炉候选合金腐蚀行为影响[J]. 中国腐蚀与防护学报, 2016, 36(5): 505-512.
[9] 刘贵群, 郑玉贵, 姜胜利, 荆军航, 董伟娟, 曾宏, 司品宪. 模拟炼油环境中Q235钢和Cr5Mo钢表面硫化物膜稳定性及动态冲刷腐蚀行为研究[J]. 中国腐蚀与防护学报, 2015, 35(2): 122-128.
[10] 陈君, 李全安, 张清, 王建章, 阎逢元. AISI 316不锈钢腐蚀磨损交互作用的研究[J]. 中国腐蚀与防护学报, 2014, 34(5): 433-438.
[11] 黄本生, 尹文锋, 王小红, 施宜君. 常减压装置常用钢材在高温原油馏分中的腐蚀研究[J]. 中国腐蚀与防护学报, 2013, 33(5): 377-382.
[12] 乔岩欣,刘飞华,任爱,姜胜利,郑玉贵. 高氮钢和321不锈钢的冲刷腐蚀行为[J]. 中国腐蚀与防护学报, 2012, 32(2): 141-145.
[13] 江克,陈学东,杨铁成,张玮,梁春雷. 典型奥氏体不锈钢高温环烷酸腐蚀行为研究[J]. 中国腐蚀与防护学报, 2012, 32(1): 59-63.
[14] 潘太军,陈德贵,张轲,胡静. NF616和12CrMoV在模拟垃圾气化环境中的高温腐蚀[J]. 中国腐蚀与防护学报, 2011, 31(6): 457-461.
[15] 余建飞 甘复兴 郝龙 陈志量. 碳钢和不锈钢在高温环烷酸介质中的腐蚀行为[J]. 中国腐蚀与防护学报, 2009, 29(6): 481-486.