Please wait a minute...
中国腐蚀与防护学报  2012, Vol. 32 Issue (4): 300-305    
  研究报告 本期目录 | 过刊浏览 |
13Cr系列不锈钢在模拟井下介质中的CO2腐蚀研究
侯赞1,周庆军2,王起江1,2,张忠铧2,齐慧滨1,2,王俊1
1. 上海交通大学材料科学与工程学院 上海 200240
2. 宝山钢铁股份有限公司 上海 201900
INVESTIGATION ON CARBON DIOXIDE CORROSION PERFORMANCE OF VARIOUS 13Cr STEELS IN SIMULATED STRATUM WATER
HOU Zan1, ZHOU Qingjun2, WANG Qijiang1,2, ZHANG Zhonghua2, QI Huibin1,2, WANG Jun1
1. School of Materials Science & Engineering, Shanghai Jiao Tong University 200240
2. Bao Shan Iron & Steel Co. Ltd, 201900
全文: PDF(1400 KB)  
摘要: 根据某油田不同井况条件,配制不同井下模拟溶液,用高温高压釜研究了4种不同成分的13Cr马氏体不锈钢在不同温度、Cl-浓度和CO2分压下的腐蚀行为,对腐蚀性能进行了评价,用SEM,EDS,XRD和XPS等方法对腐蚀产物的形貌与成分进行了观察分析。结果表明,随着温度的升高及Cl-浓度和CO2分压的增大,13Cr系列不锈钢的腐蚀速率均相应增大,腐蚀速率由高到低的排序为13Cr-0>13Cr-1>M13Cr>S13Cr;其腐蚀产物膜的形貌与结构也有明显差异。
关键词 13Cr马氏体不锈钢高温高压CO2腐蚀    
Abstract:The corrosion behaviour of various 13Cr steels (marked as 13Cr-0, 13Cr1, M13Cr and S13Cr) in the CO$_{2}$ corrosion environment was investigated by high temperature and high pressure (HTHP) autoclave under conditions of different temperatures, concentrations of Cl ion and partial pressures of CO2 to simulate the downhole surroundings of a certain oil field. Their corrosion scales were observed and analyzed by scanning electron microscope(SEM), energy dispersive spectrometer(EDS), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The results shown that corrosion rates of all steels increased with rising of temperature, concentration of Cl ion and CO2 partial pressure; temperature had the most notable impact on corrosion rates, at a high temperature, the four 13Cr steels exhibited conspicuous differences in corrosion rates; the order of corrosion rates of the four steels was 13Cr-0>13Cr-1>M13Cr>S13Cr. Furthermore, the morphologies and microstructures of corrosion scales on different steels differed significantly from each other.
Key words13Cr stainless steel    high temperature and high pressure    CO2 corrosion
收稿日期: 2011-08-22     
ZTFLH: 

TG172.6

 
通讯作者: 王俊     E-mail: junwang@situ.edu.cn
Corresponding author: WANG Jun     E-mail: junwang@situ.edu.cn
作者简介: 侯赞,男,1987年生,硕士生,研究方向为金属腐蚀与防护

引用本文:

侯赞,周庆军,王起江,张忠铧,齐慧滨,王俊. 13Cr系列不锈钢在模拟井下介质中的CO2腐蚀研究[J]. 中国腐蚀与防护学报, 2012, 32(4): 300-305.
HOU Zan, ZHOU Qiang-Jun, YU Qi-Jiang, ZHANG Zhong-Hua, ZI Hui-Bin, YU Jun. INVESTIGATION ON CARBON DIOXIDE CORROSION PERFORMANCE OF VARIOUS 13Cr STEELS IN SIMULATED STRATUM WATER. J Chin Soc Corr Pro, 2012, 32(4): 300-305.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2012/V32/I4/300

[1] Zhou Q, Xu H L, Zhou Y, et al.  Advance in research on carbon dioxide corrosion[J]. J. Lanzhou Univ. Technol., 2004, 30: 30-34

    (周琦, 徐鸿麟, 周毅等. 二氧化碳腐蚀研究进展[J]. 兰州理工大学学报, 2004, 30: 30-34)

[2] Zhang G C, Lin G F, Sun Y L, et al.  Research on corrosion resistance of 13Cr stainless steel[J]. Total Corros. Control, 2011, 25(4): 16-21

    (张国超, 林冠发, 孙育禄等. 13Cr不锈钢腐蚀性能的研究现状与进展[J]. 全面腐蚀控制, 2011, 25(4): 16-21)

[3] Chen R, Bai Z Q, Lin G F. CO2 corrosion resistance of common 13Cr steel under high temperature and high pressure[J].  Total Corros. Control, 2007, 21(2): 11-14

    (陈尧, 白真权, 林冠发. 普通13Cr钢在高温高压下的抗CO2腐蚀性能[J]. 全面腐蚀控制, 2007, 21(2): 11-14)

[4] Zhang G A, Lu M X, Wu Y S. Morphology and microstructure of CO2 corrosion scales[J]. Chin. J. Mater. Res., 2005, 19(5): 537-548

    (张国安, 路民旭, 吴荫顺. CO2腐蚀产物膜的微观形貌和结构特征[J]. 材料研究学报, 2005, 19(5): 537-548)

[5] Chen C F, Zhao G X, Yan M L, et al. Characteristics of CO2 corrosion scales on Cr-containing N80 steel[J]. J. Chin. Soc. Corros. Prot., 2002, 22(6): 335-338

    (陈长风, 赵国仙, 严密林等. 含Cr油套管钢CO2腐蚀产物膜特征[J]. 中国腐蚀与防护学报, 2002, 22(6): 335-338)

[6] Lin G F, Gu X Y, Bai Z Q, et al. Spectrum analysis of CO2 corrosion product scales on 13Cr tubing steel[A]. Seventh National Conference on Surface Engineering[C]. Wuhan, 2008: 335-340

    (林冠发, 骨勋源, 白真权等. 13Cr油套管钢CO2腐蚀产物膜的能谱分析[A]. 第七届全国表面工程学术会议[C]. 武汉, 2008: 335-340)

[7] Anselmo N, May J E, Mariano N A, et al. Corrosion behavior of supermartensitic stainless steel in aerated and CO2-saturated synthetic seawater[J]. Mater. Sci. Eng. 2006, A428(1-2): 73-79

[8] Ilevbare G O, Burstein G T.The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels[J]. Corros. Sci.,  2001, 43(3): 485-513

[9] Sugiyama M, Hara T, Asahi H. Roles of copper and nickel in 13% Cr stainless steel for improvement of wet carbon dioxide corrosion resistance[J]. Corrosion, 2001, 57(9): 777-786

[10] Sun J B, Liu W, Lu M X. Investigation progress of effect of alloying elements and microstructure on CO2 corrosion behavior of steel[J]. J. Chin. Soc. Corros. Prot., 2008, 28(4): 246-248

     (孙建波, 柳伟, 路民旭. 成分和组织影响钢CO2腐蚀的研究进展[J].  中国腐蚀与防护学报, 2008, 28(4): 246-248)
[1] 白海涛, 杨敏, 董小卫, 马云, 王瑞. CO2腐蚀产物膜的研究进展[J]. 中国腐蚀与防护学报, 2020, 40(4): 295-301.
[2] 贾巧燕, 王贝, 王赟, 张雷, 王清, 姚海元, 李清平, 路民旭. X65管线钢在油水两相界面处的CO2腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(3): 230-236.
[3] 伊红伟, 胡慧慧, 陈长风, 贾小兰, 胡丽华. CO2环境下油酸咪唑啉对X65钢异种金属焊缝电偶腐蚀的抑制作用研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 96-104.
[4] 李兆登,崔振东,侯相钰,高丽丽,王维珍,尹建华. 核级316LN不锈钢焊接接头在高温高压水中的腐蚀性能研究[J]. 中国腐蚀与防护学报, 2019, 39(2): 106-113.
[5] 朱若林, 张利涛, 王俭秋, 张志明, 韩恩厚. 核级316LN不锈钢弯管在高温高压水中的应力腐蚀裂纹扩展行为[J]. 中国腐蚀与防护学报, 2018, 38(1): 54-61.
[6] 韩帅豪,岑宏宇,陈振宇,邱于兵,郭兴蓬. 原油与高压CO2共存条件下咪唑啉缓蚀剂的作用行为研究[J]. 中国腐蚀与防护学报, 2017, 37(3): 221-226.
[7] 向超,王家贞,付华萌,韩恩厚,张海峰,王俭秋,张志明. 几种高熵合金在核电高温高压水中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2016, 36(2): 107-112.
[8] 朱若林,张志明,王俭秋,韩恩厚. 核电异种金属焊接接头的应力腐蚀裂纹扩展行为研究进展[J]. 中国腐蚀与防护学报, 2015, 35(3): 189-198.
[9] 张志明,彭青娇,王俭秋,韩恩厚,柯伟. 核用锻造态316L不锈钢在330 ℃碱溶液中应力腐蚀开裂行为研究[J]. 中国腐蚀与防护学报, 2015, 35(3): 205-212.
[10] 陈东旭, 吴欣强, 韩恩厚. 缝隙腐蚀研究进展及核电材料的缝隙腐蚀问题[J]. 中国腐蚀与防护学报, 2014, 34(4): 295-300.
[11] 马成, 彭群家, 韩恩厚, 柯伟. 核电结构材料应力腐蚀开裂的研究现状与进展[J]. 中国腐蚀与防护学报, 2014, 34(1): 37-45.
[12] 赵景茂 陈国浩. 咪唑啉与硫脲在CO2腐蚀体系中的
缓蚀协同作用机理
[J]. 中国腐蚀与防护学报, 2013, 33(3): 226-230.
[13] 刘玉,李焰. 天然气管线钢CO2腐蚀研究进展[J]. 中国腐蚀与防护学报, 2013, 33(1): 1-9.
[14] 谭季波,吴欣强,韩恩厚. 动态应变时效对核电材料环境致裂影响的研究现状与进展[J]. 中国腐蚀与防护学报, 2012, 32(6): 437-442.
[15] 赵景茂,李俊. 含羟基双子表面活性剂在CO2饱和盐水溶液中对Q235钢的缓蚀性能[J]. 中国腐蚀与防护学报, 2012, 32(4): 349-352.