Please wait a minute...
中国腐蚀与防护学报  2011, Vol. 31 Issue (6): 409-413    
  综述 本期目录 | 过刊浏览 |
水蒸汽影响氧化铝膜生长的研究新进展
邢琳琳,郑雁军,崔立山,孙茂虎,邵明增,卢贵武
中国石油大学(北京)材料科学与工程系 北京 102249
PROGRESS OF WATER VAPOUR EFFECT ON GROWTH OF ALUMINA FORMING ALLOYS
XING Linlin, ZHENG Yanjun, CUI Lishan, SUN Maohu, SHAO Mingzeng, LU Guiwu
Departments of Materials Science and Engineering, China University of Petroleum, Beijing 102249
全文: PDF(369 KB)  
摘要: 氧化铝涂层是满足高温工业环境的最佳保护性氧化膜之一,能够有效保护钢材料在高温、强腐蚀环境下发生的腐蚀。随着工业的发展,水或者水蒸汽广泛存在于氧化铝膜的各类服役环境中,如何使氧化铝涂层在含水蒸汽的高温环境中保持优异的力学性能和寿命是工业中面临的一个重要的问题。本文综述了含水气氛对合金氧化铝的稳定性、生长动力学、膜的结合力和对氧化铝膜表面形貌的影响。
关键词 氧化铝膜水蒸汽稳定性氧化速率    
Abstract:Alumina coating has excellent thermal stability at elevated temperatures, this can provide a good diffusion barrier to withstand high temperature oxidation and therefore, increase their life time in aggressive atmospheres. With the industrial development, water vapour is present in nearly all atmospheres where alumina forming alloys are used at high temperatures for industrial process. The most important problem is that how to maintain excellent performance of alloy in humid atmospheres. This paper summarizes the effect of water or water vapour on the stability of alumina scales, growth kinetics, film adherence and alumina film surface morphology.
Key wordsalumina scale    water vapour    stability    oxidation rate
收稿日期: 2010-09-01     
ZTFLH: 

TG178

 
基金资助:

重质油国家重点实验室开放基金项目(200809)资助

通讯作者: 郑雁军     E-mail: yanjun_zheng@hotmail.com
Corresponding author: ZHENG Yanjun     E-mail: yanjun_zheng@hotmail.com
作者简介: 邢琳琳,女,1985年生,博士生,研究方向为耐热钢的高温腐蚀

引用本文:

邢琳琳,郑雁军,崔立山,孙茂虎,邵明增,卢贵武. 水蒸汽影响氧化铝膜生长的研究新进展[J]. 中国腐蚀与防护学报, 2011, 31(6): 409-413.
GENG Lin-Lin, ZHENG Yan-Jun, CUI Li-Shan, XUN Mao-Hu, SHAO Meng-Ceng. PROGRESS OF WATER VAPOUR EFFECT ON GROWTH OF ALUMINA FORMING ALLOYS. J Chin Soc Corr Pro, 2011, 31(6): 409-413.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2011/V31/I6/409

[1] Horsley G, Cairns J. The inhibition of carbon deposition on stainless steel by prior selective oxidation [J]. Appl. Surf.Sci., 1984, 18(3): 273-286

[2] Millward G R, Evans H E, Aindow M, et al. The influence of oxide layers on the initiation of carbon deposition on stainless steel [J]. Oxid. Met., 2001, 56(3): 231-250

[3] Kofstad P, High Temperature Corrosion [M]. London/New York: Elsevier Applied Science, 1988

[4] Saunders S R J, Monteiro M, Rizzo F. The oxidation behavior of metals and alloys at high temperatures in atmospheres containing water vapour: A review [J]. Prog. Mater. Sci., 2008, 53:775-837

[5] Sebastien F, Sebastien C, Gilles C. Metallic interconnects for solid oxide fuel cell: Effect of water vapour on oxidation resistance of differently coated alloys [J]. J. Power Sources, 2009, 193: 136-145

[6] Larring Y, Haugsrud R, Norby T. H T. corrosion of Cr-5wt%Fe-1wt% Y2O3 alloy and conductivity of the oxide scale-effects of water vapor[J]. J. Electrochem. Soc., 2003, 150:374-379

[7] Quadakkers W J, Zurek J, Hansel M. Effect of water vapour on high temperature oxidation of FeCr alloys [J]. JOM, 2009, 61(7):44-50

[8] Prescott R, Graham M J. The formation of aluminum oxide scales on high-temperature alloys [J]. Oxid. Met., 1992, 38(3-4):233-254

[9] Smialek J L, Robinson R C, Opila E J, et al. SiC and Si3N4 recession due to SiO2 scale volatility under combustor conditions [J]. Adv. Compos. Mater, 1999, 8(1): 33-45

[10] Zhou C G, Yu J S, Gong S K, et al. Influence of water vapor on the isothermal oxidation behavior of low pressure plasma sprayed NiCrAlY coating at high temperature [J]. Surf. Coat.Technol., 2002, 161: 86-91

[11] Al-Badairy H, Tatlock G J. The influence of moisture content of the atmosphere on alumina scale formation and growth during high temperature oxidation of PM2000 [J]. Mater. High Temp.,2000, (17): 133-137

[12] Simms N J, Norton J F, Encinas-Oropesa A, et al. An evaluation of the performance of candidate gas turbine abradeable seal materials exposed to a high temperature combustion atmosphere [J]. Mater. Sci. Forum, 2004, 461-464: 875-882

[13] Chevalier S, Juzon1 P, Przybylski K, et al. Water vapor effect on high-temperature oxidation behavior of Fe3Al intermetallics[J]. Sci. Technol. Adv. Mat., 2009, (10): 7-12

[14] Canovic S, Engkvist J, Liu F, et al. Microstructural investigation of the initial oxidation of the FeCrAlRE alloy Kanthal AF in dry and wet O2 at 600 and 800℃[J]. J. Electrochem. Soc.,2010, 157(6): 223-230

[15] Kvernes I, Oliveira M, Kofstad P. High temperature oxidation of Fe-13Cr-xAl alloys in air/water vapor mixtures [J].Corros. Sci., 1977, 17: 237-52

[16] Cheng S Y, Kuan S, Tsai W. Effect of water vapor on annealing scale formation on 316SS [J]. Corros. Sci., 2006, 48(3):634-649

[17] Janakiraman R, Meier G H, Pettit F S. The effect of water vapour on the oxidation of alloys that develop alumina scales for protection[A].Tri-Service Conference on Corrosion, Proceedings [C].Wrightsville Beach: N.C, 1997. 1-15

[18] Molins R, Huntz A M. Recent improvements in the understanding of alumina film formation and durability [J]. Mater.Sci. Forum, 2004, 461-464: 29-36

[19] Liu F, Josefsson H, Svensson J E, et al. Cyclic oxidation of two FeCrAIRE foils at 1100 deg C-The influence of the concentration of minor alloying elements on scale [J]. Mater. Sci.Forum, 2008, 595-598 (part 2): 707-716

[20] Pijolat M, Dauzat M, Soustelle M. Influence of additives and water vapour on the transformation of transition aluminas into alpha alumina [J]. Thermochim. Acta, 1987, 122(1): 71-77

[21] Gotlind H, Liu F, Svensson J E, et al. The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy Kanthal AF at 900℃[J]. Oxid. Met., 2007, 67: 251-266

[22] Opila E J, Myers D L. Alumina volatility in water vapor at elevated temperatures [J]. J. Am. Ceram. Soc., 2004, 87: 1701-1705

[23] Opila E J, Jacobson N S, Myers D L, et al. Predicting oxide stability in high-temperature water vapor [J]. JOM, 2006, 1:22-28

[24] Bansal N P, Zhu D. Thermal conductivity of zirconia alumina composites [J]. Ceram. Int., 2005, 31: 911-916

[25] Krikorian O H. Thermochemical hydrogen production studies at LLNL: a status report[A]. International Energy Agency Annex 1 Workshop on Thermochemical Hydrogen[C]. United States: High Temp High Press, 1982. 1-7

[26] John Y. High temperature oxidation and corrosion of metals, Chapter 10: Effects of water vapour on oxidation, Corrosion Series [J], 2008, 1: 455-495

[27] Douglass D L, Kofstad P, Rahmel A, et al. International workshop on high temperature oxidation-subject area 1: the role of water vapour in the oxidation of metals and alloys[J]. Oxid. Met.,1996, 45(5/6): 529-620

[28] Buscail H, Heinze S, Dufour Ph, et al. Water-vapor-effect on the oxidation of Fe 21.5 wt.% Cr, 5.6 wt.% Al at 1000℃[J]. Oxid.Met., 1997, 47(5-6): 445-64

[29] Pint B A, Haynes J A, Zhang Y, et al. The effect of water vapor on the oxidation behavior of Ni-Pt-Al coatings and alloys [J].Surf. Coat. Technol., 2006, 201(7): 3852-3856

[30] Leyens C, Fritscher K, Gehrling R, et al. Oxide scale formation on a MCrAlY coating in various H2-H2O atmospheres[J]. Surf. Coat. Technol., 1996, 82: 133-144

[31] Gunnar H, Tveten B, Hornlund E. Hydrogen in chromium: influence on the high-temperature oxidation kinetics in H2O, oxide-growth mechanisms, and scale adherence [J]. Oxid.Met., 2000, 54(1-2): 1-10

[32] Henry S, Mougin J, Wouters Y, et al. Characterization of chromia scales grown on pure chromium in different oxidizing atmospheres [J]. Mater. High Temp., 2000, 17: 231-4

[33] Hudson L K, Misra C, Perrotta A J, et al. Aluminium Oxide[A]. In Ullmann's Encyclopedia of Industrial Chemistry [C]. New York: Wiley-VCH Verlag, 2002

[34] Janakiraman R, Meier G H, Pettit F S. The effect of water vapour on the oxidation of alloys that develop alumina scales for protection[A]. Cyclic oxidation of high temperature materials-mechanisms, testing methods, characterization and life time estimation [C]. European: European federation of corrosion publications, 1999. 27: 38-62

[35] Maris-Sida M C, Meier G H, Pettit F S. Some water vapor effects during the oxidation of alloys that are α-Al2O3 formers [J]. Metall. Mater. Trans., 2003,34A: 2609-2619

[36] Brady M P, Yamamoto Y, Santella Ml, et al. Composition, microstructure, and water vapor effects on internal/external oxidation of alumina-forming austenitic stainless steels[J]. Oxid.Met., 2009, 72(5-6): 311-333

[37] Onal K, Maris-Sida M C, Meier G H, et al. Water vapor effects on the cyclic oxidation resistance of alumina forming alloys [J]. Mater. High Temp., 2003, 20: 81-91

[38] Janakiraman R, Meier G H, Pettit F S. The effect of water vapor on the oxidation of alloys that develop alumina scales for protection [J]. Metall. Mater. Trans., 1999, 30A: 2905-13

[39] Smialek J L, Morscher G N. Delayed alumina scale spallation on Rene'N5+Y: moisture elects and acoustic emission [J].Mater. Sci. Eng., 2002, 332A: 11-24

[40] Tallman R L, Gulbransen E A. Crystal morphology and mechanisms of growth of α-Fe (III) oxide whiskers on iron [J]. J. Electrochem. Soc., 1967, 114(12): 1227-1230

[41] RuDiger D. Solution and transport of water in oxides [J]. Mater. High Temp., 2005, 22: 93-103

[42] Raynaud G M, Rapp R A. In situ observation of whiskers, pyramids and pits during the high-temperature oxidation of metals [J]. Oxid. Met., 1984, 21: 89-102

[43] Huntz A M, Hou P Y, Molins R. Study by deflection of the oxygen pressure influence on the phase transformation in alumina thin films formed by oxidation of Fe3Al [J]. Mater. Sci. Eng.,2007, 467A (1-2): 59-70

[44] Engkvist J, Canovic S, Hellstrom K, et al. Alumina scale formation on a powder metallurgical FeCrAl alloy (Kanthal APMT) at 900-1100℃ in dry O2 and in O2+H2O [J].Oxid. Met., 2010, 73: 233-253
[1] 李庆鹏,许茜,刘建国,严川伟,张亮,殷跃军,韩长智. 水性无铬达克罗涂料的制备与性能研究[J]. 中国腐蚀与防护学报, 2016, 36(6): 559-565.
[2] 睢文杰,赵文杰,张星,秦立光,彭叔森,乌学东,薛群基. 铜合金表面巯基官能有机硅溶胶-凝胶涂层中TEOS含量对其防腐性能的影响[J]. 中国腐蚀与防护学报, 2016, 36(1): 52-58.
[3] 袁军涛, 王文, 朱圣龙, 王福会. Super 304H钢在700~900 ℃纯水蒸汽中的氧化行为[J]. 中国腐蚀与防护学报, 2014, 34(3): 218-224.
[4] 宋琴, 武俊伟, 张辉, 杜翠薇. 钛基DSA阳极在电镀铬工艺中的应用研究[J]. 中国腐蚀与防护学报, 2013, 33(6): 507-514.
[5] 袁军涛, 吴细毛, 王文, 朱圣龙, 王福会. 晶粒尺寸对耐热钢在高温水蒸汽中的氧化行为的影响[J]. 中国腐蚀与防护学报, 2013, 33(4): 257-264.
[6] 岳增武,傅敏,李辛庚,田学雷. 内壁喷丸处理对TP304H耐热钢锅炉管抗水蒸汽氧化性能的影响[J]. 中国腐蚀与防护学报, 2012, 32(2): 137-140.
[7] 肖伟,单大勇,陈荣石. 熔模铸造ZA93镁合金的化学镀镍工艺研究[J]. 中国腐蚀与防护学报, 2012, 32(2): 90-94.
[8] 张都清 徐敬军. 水蒸汽含量对SA213T91钢650 ℃氧化行为的影响[J]. 中国腐蚀与防护学报, 2009, 29(5): 349-352.
[9] 张茂勋; 官云琴; 郑玉朋 . ADC12铝合金在水蒸汽中的腐蚀行为[J]. 中国腐蚀与防护学报, 2002, 22(4): 229-232 .
[10] 王家军;孙榆芳;叶锐曾. Ti-N扩散障碍膜的组织结构及高温热稳定性[J]. 中国腐蚀与防护学报, 1994, 14(3): 247-251.