|
|
铁素体-马氏体钢P91和P92在超临界水中腐蚀后氧化膜多孔性分析 |
尹开锯1;邱绍宇1;唐睿1;张强1;张乐福2;刘鸿1 |
1.中国核动力研究设计院核燃料及材料国家级重点实验室 成都 610041
2.上海交通大学核科学与工程学院 上海 200240 |
|
CHARACTERIZATION OF THE POROSITY OF THE OXIDE SCALES ON FERRITIC-MARTENSITIC STEEL P91 AND P92 EXPOSED IN SUPERCRITICAL WATER |
YIN Kaiju1; QIU Shaoyu1; TANG Rui1; ZHANG Qiang1;ZHANG Lefu2; LIU Hong1 |
1. National Key Lab.For Nuclear Fuel and Materials; Nuclear Power Institute of China; Chengdu 610041
2. School of Nuclear Science and Engineering; Shanghai Jiaotong University; Shanghai 200240 |
引用本文:
尹开锯;邱绍宇;唐睿;张强;张乐福;刘鸿. 铁素体-马氏体钢P91和P92在超临界水中腐蚀后氧化膜多孔性分析[J]. 中国腐蚀与防护学报, 2010, 30(1): 1-5.
YUN Kai-Ju,
QIU Shao-Yu,
TANG Rui.
CHARACTERIZATION OF THE POROSITY OF THE OXIDE SCALES ON FERRITIC-MARTENSITIC STEEL P91 AND P92 EXPOSED IN SUPERCRITICAL WATER. J Chin Soc Corr Pro, 2010, 30(1): 1-5.
链接本文:
https://www.jcscp.org/CN/
或
https://www.jcscp.org/CN/Y2010/V30/I1/1
|
[1] K. Kataoka, S. Shiga, K. Moriya, Y. Oka, S. Yoshida, H. Takahashi, Proceedings of ICAPP’03, Cordoba Spain, May 4–7, 2003, Paper No. 3258.[2] S. Teysseyre, J. McKinley, G.S. Was, D.B. Mitton, H. Kim, J.-K. Kim, R.M. Latanision, Proceedings of the 11th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems- Water Reactors, Stevenson, Washington, August 10–14, 2004, pp. 63–72.[3] 韩恩厚等,超临界水环境中材料的腐蚀研究现状,腐蚀科学与防护技术,1999,11(1):53.[4] Pantip Ampornrat, Gary S. Was. Oxidation of ferritic–martensitic alloys P91, HCM12A and HT-9 in supercritical water. Journal of Nuclear Materials 371 (2007) 1–17.[5] R. L. Klueh, D. R. Harries, Development of high (7-12%) chromium martensitic steels. High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, SATM International, 2001.[6] F. Abe, M. Taneike, K. Sawada. Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides, International Journal of Pressure Vessels and Piping 84 (2007) 3–12.[7] Bumjoon Kim, Chanseo Jeong, Byeongsoo Lim, Creep behavior and microstructural damage of martensitic P92 steel weldment, Materials Science and Engineering A 483–484 (2008) 544–546.[8] L. Tan, Y. Yang, T.R. Allen. Oxidation behavior of iron-based alloy HCM12A exposed in supercritical water, Corrosion Science 48(2006) 3123-3138.[9] G.S. Was, P. Ampornrat, G. Gupta. Corrosion and stress corrosion cracking in supercritical water. Journal of Nuclear Materials 371(2007)176-201.[10] 高欣,吴欣强,韩恩厚,高温高压水中腐蚀产物膜的研究现状,腐蚀科学与防护技术,2007,19(2):110.[11] A. Fry, S. Osgerby, M. Wright, Oxidation of Alloys in Steam Environments – A Review, National Physical Laboratory (NPL) Report MATC(A)90, September, 2002.[12] P.J. Ennis, Y. Wouters, J. Quadakkers. in: The Effects of Oxidation on the Service Life of 9–12% Chromium Steels, Advanced Heat Resistant Steel for Power Generation, Institute of Materials 1, 1999, pp. 457–467.[13] K. Nakagawa, I. Kajigaya, T. Yanagisawa, M. Sato, M. Abe, Study of Corrosion Resistance of Newly Developed 9–12% Cr Steels for Advanced Units, pp. 468–481.[14] G.E. Totten, M.A.H. Hows. Steel Heat Treatment Handbook, Marcel Dekker, New York, 1997.[15] H.S.C. O’Neill, W.A. Dollase, Crystal structures and cation distributions in simple spinels from powder XRD structural refinements: MgCr2O4, ZnCr2O4, Fe3O4 and the temperature dependence of the cation distribution in ZnAl2O4, Phys. Chem. Miner. 20 (1994) 541–555.[16] T.I. Barry, A.T. Dinsdale, J.A. Gibsy, B. Hallstedt, M. Hillert, B. Jansson, S. Jonsson, B. Sundman, J.R. Taylor, Petten Symposium on Phase Diagrams, Institute of Metals, 1990. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|