Please wait a minute...
中国腐蚀与防护学报  2009, Vol. 29 Issue (6): 475-480    
  研究报告 本期目录 | 过刊浏览 |
有机覆膜对热烧结锌铝涂层耐腐蚀性能的影响
王俊1;2;李宁2;王佳1;许立坤2
1. 中国海洋大学化学化工学院 青岛 266100
2. 中船重工七二五研究所海洋腐蚀与防护国防科技重点实验室 青岛 266071
EFFECT OF ORGANIC TOP COATING ON ANTICORROSION PERFORMANCE OF SINTERED Zn-Al COATING
WANG Jun1;2; LI Ning2; WANG Jia1; XU Likun2
1. College of Chemistry and Chemical Engineering; Ocean University of China; Qingdao 266100
2. State Key Laboratory for Marine Corrosion and Protection; Luoyang Ship Material Research Institute; Qingdao 266071
全文: PDF(1220 KB)  
摘要: 

为提高热烧结锌铝涂层(简称锌铝涂层)的耐蚀性,在涂层表面涂覆一层环氧富铝膜,形成复合涂层。采用十字划格法测试锌铝涂层和复合涂层的附着强度,并用扫描电镜(SEM)分析涂层微观形貌;用海水全浸实验和中性盐雾实验评价涂层的耐蚀性能;采用动电位极化曲线和电化学阻抗谱(EIS)研究涂层的电化学性能。结果表明,复合涂层表面更为完整致密,防水性能优于锌铝涂层;环氧富铝膜层能够有效的阻挡腐蚀介质的入侵,复合涂层耐蚀性比锌铝涂层高。复合涂层腐蚀初期主要为扩散控制,随着腐蚀介质的不断渗入,环氧膜层中的Al粉发生活化反应,起到了一定的牺牲阳极保护作用。有机覆膜提高了锌铝涂层在海洋环境中的适用能力。

关键词 有机覆膜热烧结锌铝涂层复合涂层环氧富铝膜电化学阻抗谱    
Abstract

Composite coating was prepared by adherence of the epoxy Al-rich coating on sintered Zn-Al coating, in order to improve the anticorrosion performance of Zn-Al coating in seawater. The adhesion of sintered Zn-Al coating and composite coating were tested by cross cut test. The two different coatings were observed by scanning electron microscope (SEM). The anticorrosion performances of the two different coatings were studied by means of immersion test in seawater and neutral salt spray test. The corrosion electrochemical behaviors of the two different coatings were studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results show that the composite coating is more compact than the Zn-Al coating. It exhibits better waterproof performance than the Zn-Al coating. The epoxy Al-rich coating could effectively prevent corrosive species attacking. The composite coating exhibits obviously better anticorrosion performance than the Zn-Al coating. A typical Warburg impedance character appears at the beginning of corrosion process of the composite coating;Al flakes of the epoxy coating dissolve and exert sacrificial anode effects with the penetration of erosive species. The organic top coating improves the application of Zn-Al coating in seawater.

Key wordsorganic top coating    sintered Zn-Al coating    composite coating    epoxy Al-rich coating    electrochemical impedance spectroscopy
收稿日期: 2008-09-03     
ZTFLH: 

TG17

 
基金资助:

国家重点实验室基金课题资助

通讯作者: 王佳     E-mail: jwang@houc.edu.cn
Corresponding author: WANG Jia     E-mail: jwang@houc.edu.cn
作者简介: 王俊,女,1984年生人,硕士生,研究方向为材料腐蚀与防护

引用本文:

王俊 李宁 王佳 许立坤. 有机覆膜对热烧结锌铝涂层耐腐蚀性能的影响[J]. 中国腐蚀与防护学报, 2009, 29(6): 475-480.
YU Jun- junwang. EFFECT OF ORGANIC TOP COATING ON ANTICORROSION PERFORMANCE OF SINTERED Zn-Al COATING. J Chin Soc Corr Pro, 2009, 29(6): 475-480.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y2009/V29/I6/475

[1] Li G Y, Lian J S, Jiang Z H, et al. Study and Application of the zinc-aluminum coating [J]. Heat Treat. Met., 2003, 28(9): 8-12
     (李光玉, 连建设, 江中浩等. 锌铝涂层的研究开发与应用 [J]. 金属热处理,2003, 28(9): 8-12)
[2] Cho K W, Rao V. S, Kwon H S. Microstructure and electrochemical characterization of trivalent chromium based conversion coating on zinc [J]. Electrochim. Acta, 2007, 52(13):4449-4456
[3] He Y D, Li D Z, Wang D R, et al. Corrosion resistance of Zn-Al co-cementation coatings on carbon steels [J]. Mater. Lett.,2002, 56(4): 554-559
[4] Yu X W, LI Z S, Cao C N. Research on zinc-chrome film formation and corrosion resistance mechanism [J].Automob. Technol. Mater., 2000(9): 12-14
     (于兴文, 李自松, 曹楚南. 锌铬膜成膜过程及耐腐蚀机理的研究 [J]. 汽车工艺与材料, 2000(9): 12-14)
[5] Xu L S, Li W D. Technique of “DACROMET” and application [J].Des. Manuf., 2004(6): 39-42
     (许乐生, 李卫东. “达克罗”技术及其应用 [J]. 设计与制造, 2004\linebreak(6): 39-42)
[6] Chen S Y, Liu C S, Liu H Y, et al. Preparation of ultrafine Zn flake for Zn-Cr thin coating [J]. Mater. Prot., 2003, 36(1): 39-41
      (陈岁元, 刘常升, 刘海亚等. 锌铬膜涂料用微细Zn片的制备及研究 [J]. 材料保护, 2003, 36(1): 39-41)
[7] Luo J, Zhang Z H, Zhang Z D, et al. Microstructure and properties of Dacromet coatings on car surface [J]. Foundry Technol., 2007, 28(7): 974-976
     (罗静, 张祖恒, 张毓栋等. 汽车表面达克罗防腐涂层的组织和性能 [J]. 铸造技术, 2007, 28(7): 974-976)
[8] Wu Z H, Luo M. Use and development trend of dacromet technology [J]. China Coatings, 2008, 23(1): 55-57
     (吴宗汉, 罗曼. 达克罗技术的应用及发展方向 [J]. 中国涂料, 2008, 23(1): 55-57)
[9] Liu J G, Gong G P, Yan C W. EIS study on the anti-corrosion performance of polymer/dacromet composite systems in 3.5\% NaCl solution [J]. J.Chin. Soc. Corros. Prot., 2006, 26(2): 89-93
     (刘建国, 龚高平, 严川伟. 聚合物/达克罗复合涂层体系在3.5%NaCl中耐腐蚀性能的EIS研究 [J]. 中国腐蚀与防护学报, 2006, 26(2): 89-93)
[10] Xiao H S. Inspective methods of Dacromet treatment [J]. Electroplating Finishing, 2004, 23(1): 45-48
     (肖合森. 达克罗处理的检测方法 [J]. 电镀与涂饰, 2004, 23(1): 45-48)
[11] Liu J G, Gong G P, Yan C W. EIS study of corrosion behavior of organic coating/Dacromet composite systems [J]. Electrochim.Acta, 2005, 50(16): 3320-3332
[12] Deflorian F, Fedrizzi L, Rossi S, et al. Organic coating capacitance measurement by EIS: ideal and actual trends [J]. Electrochim. Acta,1999, 44: 4243-4249
[13] Liu Y, Zhu Z X, Ma J, et al. Study on self-sealing mechanism of Zn and Zn-Al coating based on electrochemical impedance spectroscopy [J].China Surf. Eng., 2005, (2): 27-30
       (刘燕, 朱子新, 马洁等. 基于电化学阻抗谱的Zn及Zn-Al涂层的自封闭机理研究 [J]. 中国表面工程, 2005, (2): 27-30)

[1] 胡露露, 赵旭阳, 刘盼, 吴芳芳, 张鉴清, 冷文华, 曹发和. 交流电场与液膜厚度对A6082-T6铝合金腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2020, 40(4): 342-350.
[2] 王霞,任帅飞,张代雄,蒋欢,古月. 豆粕提取物在盐酸中对Q235钢的缓蚀性能[J]. 中国腐蚀与防护学报, 2019, 39(3): 267-273.
[3] 达波,余红发,麻海燕,吴彰钰. 等效电路拟合珊瑚混凝土中钢筋锈蚀行为的电化学阻抗谱研究[J]. 中国腐蚀与防护学报, 2019, 39(3): 260-266.
[4] 达波,余红发,麻海燕,吴彰钰. 阻锈剂的掺入方式对全珊瑚海水混凝土中钢筋锈蚀的影响[J]. 中国腐蚀与防护学报, 2019, 39(2): 152-159.
[5] 邓培昌, 刘泉兵, 李子运, 王贵, 胡杰珍, 王勰. X70管线钢在热带海水-海泥跃变区的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2018, 38(5): 415-423.
[6] 邓三喜, 闫小宇, 柴柯, 吴进怡, 史洪微. 假单胞菌对聚硅氧烷树脂清漆涂层分解及防腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2018, 38(4): 326-332.
[7] 曹海娇, 魏英华, 赵洪涛, 吕晨曦, 毛耀宗, 李京. Q345钢预热时间对熔结环氧粉末涂层防护性能的影响II:涂层体系失效行为分析[J]. 中国腐蚀与防护学报, 2018, 38(3): 255-264.
[8] 张杰, 胡秀华, 郑传波, 段继周, 侯保荣. 海洋微藻环境中钙质层对Q235碳钢腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2018, 38(1): 18-25.
[9] 梅朦, 郑红艾, 陈惠达, 张鸣, 张大全. 硫酸盐还原菌对Cu在循环冷却水中腐蚀行为的影响[J]. 中国腐蚀与防护学报, 2017, 37(6): 533-539.
[10] 孟凡帝, 刘莉, 李瑛, 王福会. 用于原位检测在深海并压力交变环境中有机涂层电化学阻抗的预埋微电极研究[J]. 中国腐蚀与防护学报, 2017, 37(6): 561-566.
[11] 王军, 冯超, 彭碧草, 谢亿, 张明华, 吴堂清. S450EW焊接接头在NaHSO3溶液中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2017, 37(6): 575-582.
[12] 王佳, 贾梦洋, 杨朝晖, 韩冰. 腐蚀电化学阻抗谱等效电路解析完备性研究[J]. 中国腐蚀与防护学报, 2017, 37(6): 479-486.
[13] 陈振宁,陈日辉,潘金杰,滕艳娜,雍兴跃. L921A钢在3.5%NaCl溶液中的有机/无机复配缓蚀剂研究[J]. 中国腐蚀与防护学报, 2017, 37(5): 473-478.
[14] 冯立, 张立功, 李思振, 郑大江, 林昌健, 董士刚. 柠檬酸铁浓度对镁合金微弧氧化黑色膜层微观结构及耐蚀性的影响[J]. 中国腐蚀与防护学报, 2017, 37(4): 360-365.
[15] 高洪扬,王巍,许立坤,马力,叶章基,李相波. 改性环氧防腐涂层在模拟深海高压环境的失效行为[J]. 中国腐蚀与防护学报, 2017, 37(3): 247-263.