Please wait a minute...
中国腐蚀与防护学报  1994, Vol. 14 Issue (2): 106-112    
  研究报告 本期目录 | 过刊浏览 |
Fe-Cr-Al合金在纯SO_2气氛中的高温热循环腐蚀行为
曹铁梁;潘辉英;董荷花;张允书
中国科学院上海冶金研究所
HIGH TEMPERATURE CYCLIC OXIDATION BEHAVIOR OF Fe-Cr-Al ALLOYS IN PURE SO_2 ATMOSPHERE
Cao Tieliang; Pan Huiying; Dong Hehua and Zhang Yunshu(Shanghai Institute of Metallurgy; Chinese Academy of Sciences)
全文: PDF(2223 KB)  
摘要: 研究了Fe-20Cr-5Al和Fe-20CrSAl-0.5Y合金在1200℃latmSO2气氛中热循环条件下的高温腐蚀行为,并与恒温腐蚀相比较.测定了腐蚀动力学曲线,观察腐蚀产物表面,横截面和脆断断口的形貌,并分析元素的分布,确定腐蚀产物相组成.结果表明,在5000小时实验周期内,不含钇的合金遭受氧化/硫化腐蚀,腐蚀动力学呈直线规律.含钇合金只发生高温氧化反应,腐蚀动力学与恒温腐蚀时的差别不大,仍大体符合抛物线规律.加钇有效地抑制了Al3+在α-Al2O3中的扩散,合金表面氧化膜依赖氧的传质而成长,发展出粘着性好的柱状晶,在交变热应力作用下不易开裂和剥落,显著提高了合金的耐蚀性.
关键词 Fe-Cr-Al合金高温腐蚀    
Abstract:High temperature corrosion behavior of Fe-20Cr-5Al and Fe-20Cr-SAl-0.5Y alloys under thermal cycling condition was studied in pure SO2 atmosphere at 1200 ℃, aug compared to that exhibited under isothermal condition. The corrosion kinatics of the alloys were measured. The morphologies of surfaces, cross sections and fractures of the corrosion product were examined, the elemed distribution in the corrosion scales was analyzed, and the components of the corrosion products were also identified. The results show that the yttrium-free alloy was subject to oxidation/sulfidation attack at a linear rate. In contrast,the yttrium-containing alloy underwent pure oxidation at a parabolic rate without sulfidation in the duration of 500 hrs. The yttrium doping, as a donor, in α-Al2O3 is believed to effectively block the bulk diffusion of Al3+ in the oxide scale due to a decrease in the Ali concentration. As a result, the oxide scale growth would rely entirely upon the oxygen diffusion down through the oxide grain boundaries, thus leading to the development of a fine, edhesive columnar Al2O3 layer with superior cracking and spallation resistance, even under thermal cycling condition. Consequently, the cyclic oxidation resistance of the alloy is remarkably improved.
Key words Fe-Cr-Al alloy    high temperature corrosion    yttrium
收稿日期: 1994-04-25     
基金资助:中国科学院腐蚀科学开放实验室课题

引用本文:

曹铁梁;潘辉英;董荷花;张允书. Fe-Cr-Al合金在纯SO_2气氛中的高温热循环腐蚀行为[J]. 中国腐蚀与防护学报, 1994, 14(2): 106-112.
. HIGH TEMPERATURE CYCLIC OXIDATION BEHAVIOR OF Fe-Cr-Al ALLOYS IN PURE SO_2 ATMOSPHERE. J Chin Soc Corr Pro, 1994, 14(2): 106-112.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1994/V14/I2/106

1曹铁梁,潘辉英,董荷花,张允书.中国腐蚀与防护学报,1992,12:1162WoodGC,ScottFH.inHighTemperatureCorrosion,NACE-6,RappRA.ed.Houston:NACE,1983,p2773ButtBV,KvogerFA.J.Amer.Ceram.Soc,1975,58:4744EI-AlatMM.KroecrFA.Ibid..1982.65:280
[1] 谢冬柏, 洪昊, 王文, 彭晓, 多树旺. 模拟燃烧环境介质和温度对不锈钢表面氧化物形态的影响研究[J]. 中国腐蚀与防护学报, 2020, 40(4): 358-366.
[2] 梁书源, 姜翠玉. 电厂燃油锅炉腐蚀机理及防腐添加剂研究进展[J]. 中国腐蚀与防护学报, 2018, 38(2): 105-116.
[3] 马双忱, 焦坤灵, 张立男, 孙尧, 吴文龙, 张小霓. 高温气相条件下硫酸氢铵与硫酸铵对20#碳钢的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2017, 37(6): 605-612.
[4] 张明明,辛丽,丁学勇,耿树江,朱圣龙,王福会. 600 ℃/NaCl-H2O-O2协同环境中Ti/TiAlN多层涂层的耐蚀行为[J]. 中国腐蚀与防护学报, 2017, 37(1): 29-35.
[5] 李琰,鲁金涛,杨珍,朱明,谷月峰. 烟气S含量对700 ℃超超临界锅炉候选合金腐蚀行为影响[J]. 中国腐蚀与防护学报, 2016, 36(5): 505-512.
[6] 黄本生, 尹文锋, 王小红, 施宜君. 常减压装置常用钢材在高温原油馏分中的腐蚀研究[J]. 中国腐蚀与防护学报, 2013, 33(5): 377-382.
[7] 潘太军,陈德贵,张轲,胡静. NF616和12CrMoV在模拟垃圾气化环境中的高温腐蚀[J]. 中国腐蚀与防护学报, 2011, 31(6): 457-461.
[8] 董泽华,何金杯,郭兴蓬,张耀享,汉继成. 环烷酸与有机硫对Cr5Mo钢高温腐蚀的交互作用研究[J]. 中国腐蚀与防护学报, 2011, 31(3): 219-224.
[9] 任鑫; 杨怀玉; 王福会; 赵柱; 邵亚薇 . A3钢在钒化物中700℃下的高温腐蚀行为[J]. 中国腐蚀与防护学报, 2002, 22(2): 92-94 .
[10] 张扬伟; 王富岗; 李德俊; 王大庸 . 化学热处理表面改性310SS高温腐蚀行为[J]. 中国腐蚀与防护学报, 2002, 22(1): 37-40 .
[11] 李远士; 牛焱; 王富岗 . Co-15wt%Y合金的高温硫化-氧化腐蚀[J]. 中国腐蚀与防护学报, 1999, 19(6): 351-355 .
[12] 辛丽;周龙江;李美栓;李铁藩. 离子注入Y~+对Ni30Cr定向凝固合金氧化行为的影响[J]. 中国腐蚀与防护学报, 1997, 17(4): 269-275.