Please wait a minute...
中国腐蚀与防护学报  1991, Vol. 11 Issue (4): 364-372    
  研究报告 本期目录 | 过刊浏览 |
经磷酸溶液短时处理6Cr13钢表面膜的研究
王志杰;周佩德;邹惠良
中科院上海冶金研究所;中科院上海冶金研究所;上海测试技术研究所
A STUDY OF SURFACE FILM ON 6Cr13 STAINLESS STEEL AFTER SHORT TIME TREATMENT IN PHOSPHORIC ACID
Wang Zhijie and Zhou Peide (Shanghai Institute of Metallurgy Academia Sinica) Zhou Huiliang (Shanghai Institute of Testing Technology)
全文: PDF(629 KB)  
摘要: 研究了6Crl3不锈钢经磷酸溶液短时处理后耐蚀性的变化以及磷酸浓度、外加铜离子对耐蚀性能的影响。使用AES和XPS技术分析了6Crl3钢经这种处理后表面膜的化学组成和结构。结果表明,6Crl3钢经处理后耐蚀性的提高与表面膜内铬的富集有关,其表面膜的组成和结构则与磷酸溶液的浓度有关。
Abstract:Corrosion resistance of 6Cr13 stainless steel after short time treatment in H_3PO_4 solutions was evaluated in 3.5% NaCl at 25℃ for 4 hrs and the effect of H_3PO_4 concentration in and the addition of Cu~(2+) to the solutions on corrosion resistance were also studied AES and XPS were employed to determine the chemical composition and structure of the surface films formed on the steel. The results indicated that the increase in corrosion resistance of the treated steel was related to the enrichment of Cr in the surface films. The structure of the surface films was dependent upon H_3PO_4 concentration in solutions.
收稿日期: 1991-08-25     

引用本文:

王志杰;周佩德;邹惠良. 经磷酸溶液短时处理6Cr13钢表面膜的研究[J]. 中国腐蚀与防护学报, 1991, 11(4): 364-372.
. A STUDY OF SURFACE FILM ON 6Cr13 STAINLESS STEEL AFTER SHORT TIME TREATMENT IN PHOSPHORIC ACID. J Chin Soc Corr Pro, 1991, 11(4): 364-372.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1991/V11/I4/364

[1] Asami,K.,Hashimoto,K.,and Shimodara,S.,Corrosion Science, 18,151(1978)
[2] Sed,K.,and Sato, N.,Corrosion Science, 18, 577(1978)
[3] Lewis,G.,Fox, P. G. and Boden,P. J. ,Corrosion Science, 20, 311(1980)
[4] Blestek,T. and Weber,J. Electrolytic and Chemical Conversion Coatings,Wydawnictwa Naukowo-Techniczne, 141(1976)
[5] Wagner, C. D. et al,Handbook of X-Ray Photoelctron Spectroscopy Perkin-Elmer Corporation (1979)
[6] Mccafferty,M. ,Bernett, M . K . and Murday,J . S,Corrosion Science, 28, 559(1988)
[7] 周佩德等,上海冶金研究所,关于不锈钢刀片防锈新工艺的研究。(待发表)
No related articles found!