Please wait a minute...
中国腐蚀与防护学报  1983, Vol. 3 Issue (3): 168-176    
  研究报告 本期目录 | 过刊浏览 |
铸造镍基合金K-3的热腐蚀及防护研究
肖绪昌;吴凤筠;杨忠林;熊季远
北京航空材料研究所;北京航空材料研究所;北京航空材料研究所;北京航空材料研究所
HOT CORROSION AND PROTECTION OF CAST NICKEL-BASE SUPERALLOY K-3 FOR GAS TURBINE
Xiao Xuchang Yang Zhonglin Wu Fengjun Xiong Jiyuan (Institute of Aeronautical Materials;Beijing;China)
全文: PDF(796 KB)  
摘要: 用光学显微镜、X 光衍射、扫描电镜、能谱分析和化学分析等多种手段,对经热腐蚀后的K-3合金试样及渗铝的 K-3合金涡轮叶片进行了分折研究。结果表明叶片失效的原因是硫化及熔盐引起的热腐蚀;低铬、富难熔金属的 K-3合金的热腐蚀机制是硫化、碱性熔解和酸性熔解的综合作用。用 RFL 燃气腐蚀装置对不同的保护涂层进行抗热腐蚀性能的对比试验表明:渗铝的防护效果并不理想,而富硅的扩散型和融烧型料浆铝硅涂层则具有良好的抗热腐蚀性能。
Abstract:The corrosion products on both corroded blades from service and corro- ded specimens from test rig as made of cast nickel-base superalloy K-3 and coated with aluminide are examined by optical microscope,X-ray diffraction, SEM,EDAX and chemical analyses to explore failure mechanism.It is shown that sulphurization and hot corrosion caused by molten salt are responsible to the failure of the blades,and it is suggested that the mechanism of hot eorro- sion of low chromium,refractory metal-rich K-3 superalloy is the synergism of sulphidation,basic fluxing and acidic fluxing.When the temperature is raised to about 900℃,the weight change during the hot corrosion propagation stage of this superalloy obeys a linear relationship with time after an incuba- tion period.In order to improve the hot corrosion resistance of conventional aluminide coatings,two kinds of aluminium-silicon coating technique are deve- loped.A diffusion-type slurry coating and a sintered slurry coating based on aluminium-silicon are evaluated in RFL burner rig tester by comparing with pack aluminide coatings.It is interesting to note that sintered Al-Si slurry coating as well as the diffusion-type Al-Si slurry coating exhibit a much better hot corrosion resistance than conventional pack aluminide coating. When specimens are exposed to combustion gases containing 50ppm sea salt,the Al-Si coatings protected K-3 superalloy for more than 200 hrs with- out any indication of hot corrosion,while the Al-coated K-3 snperalloy lasted only less than 50 hrs.
收稿日期: 1983-06-25     

引用本文:

肖绪昌;吴凤筠;杨忠林;熊季远. 铸造镍基合金K-3的热腐蚀及防护研究[J]. 中国腐蚀与防护学报, 1983, 3(3): 168-176.
. HOT CORROSION AND PROTECTION OF CAST NICKEL-BASE SUPERALLOY K-3 FOR GAS TURBINE. J Chin Soc Corr Pro, 1983, 3(3): 168-176.

链接本文:

https://www.jcscp.org/CN/      或      https://www.jcscp.org/CN/Y1983/V3/I3/168

[1] N.S.Bornstein,M.A.Decrescente,Corrosion,26,7,209(1970)
[2] N.R.Lindblad,W.F.Schilling,et al,Transactions of the ASME Paper No.79-GT-47
[3] G.W.Goward,Proceedings of the 1974 Gas Turbine Materials in the Marine Environment Conference,277 (1974)
[4] 吴凤筠 RFL 燃气腐蚀试验装置研究总结 北京航空材料研究所未发表资料,(1980)
[5] M.A.Decrescente,N.S.Bornstein,Corrosion 24,127(1968)
[6] N.S.Bornstein,M.A.Decrescente,H.A.Roth,Corrosion 28,264(1972)
[7] J.A.Goebel,F.S.Pettit,G.W.Goward,“Deposition and Corrosion in Gas Turbines”,edited by A.B.Hart and A.J.B.Cutler,Applied Sei.Pub.Lond.,96 (1973)
[8] J.A.Goebel,E.J.Felten and F.S.Pettit,Proceedings of the 1974 Gas Turbine Materials in the Marine Environment Conference,93-114(1974)
[9] N.S.Bornstein,M.A.Decrescente,The International Corrosion Forum Devoted Exclusively to the Protection and Performance of Materials,3,165,(1975)
[10] J.L.Smialek,NASA Tech.Memo.,TMX-3001(1974)
[11] C.E.Lowell,NASA Tech,Note,TND-6838(1972)
[12] 蔡玉林、郑运荣、莫龙生、杨忠林,Al-Si 涂层中硅的分布及作用-含 Si 隔层的研究,航空材料,1,(1981)
[13] V.S.Moore,et al.,NASA CR-72714 (1970)
No related articles found!