Please wait a minute...
中国腐蚀与防护学报  2016, Vol. 36 Issue (2): 130-136    DOI: 10.11902/1005.4537.2015.078
  本期目录 | 过刊浏览 |
SiC表面化学镀镍对SiCp/Al复合材料界面及耐蚀性影响
刘阳,华小珍(),黄晋华,崔霞,周贤良,俞应炜
南昌航空大学材料科学与工程学院 南昌 330063
Influence of Electroless Nickel Plating of SiC Particles on Interface Character and Corrosion Resistance of SiCp/Al Composites
Yang LIU,Xiaozhen HUA(),Jinhua HUANG,Xia CUI,Xianliang ZHOU,Yingwei YU
School of Material Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China
全文: PDF(1293 KB)   HTML
摘要: 

对SiCp表面化学镀镍后制备的铝基复合材料 (SiCp-Ni/Al) 界面及耐蚀性差异进行研究。采用XRD,SEM及EDS观察SiCp-Ni/Al与未镀镍SiCp制备的Al基复合材料 (SiCp/Al) 界面,通过极化曲线及电化学噪声测试其耐蚀性。结果表明,镀镍层改善了SiCp与Al基体间的润湿性,提高了界面结合强度,减少了有害界面反应物A14C3的生成。SiCp/Al在3.5%(质量分数)NaCl溶液中浸泡2000 s前表现为局部腐蚀行为,之后转变为均匀腐蚀。而SiCp-Ni/Al在整个浸泡过程表现为局部腐蚀,且其自腐蚀电位较高,噪声电阻较大,耐蚀性更好。

关键词 化学镀镍SiCp/Al复合材料界面耐蚀性    
Abstract

The interface character and corrosion resistance of SiCp/Al composites prepared with electroless nickel plated SiC particles were studied by means of XRD, SEM and EDS as well as polarization curve and electrochemical noise test. The results show that the nickel plating improves the wettability between SiC particles and aluminum matrix, increases the interface bonding strength and reduces the formation of Al4C3, the later is a detrimental product resulted by the interfacial reaction of SiC and the matrix. SiCp/Al composites made of non-modified SiC particles suffered from local corrosion during immersion in 3.5%NaCl solution for the first 2000 s, and then turn to uniform corrosion. However, SiCp/Al composites made of Ni-plated SiC particles suffered from local corrosion during the whole immersion test. In addition, the Ni-plated SiCp/Al composites exhibited much positive free corrosion potential and higher noise resistance, therefore, implying a better corrosion resistance.

Key wordselectroless nickel plating    SiCp/Al    interface    corrosion resistance
    
基金资助:国家自然科学基金项目 (51262023) 资助

引用本文:

刘阳,华小珍,黄晋华,崔霞,周贤良,俞应炜. SiC表面化学镀镍对SiCp/Al复合材料界面及耐蚀性影响[J]. 中国腐蚀与防护学报, 2016, 36(2): 130-136.
Yang LIU, Xiaozhen HUA, Jinhua HUANG, Xia CUI, Xianliang ZHOU, Yingwei YU. Influence of Electroless Nickel Plating of SiC Particles on Interface Character and Corrosion Resistance of SiCp/Al Composites. Journal of Chinese Society for Corrosion and protection, 2016, 36(2): 130-136.

链接本文:

https://www.jcscp.org/CN/10.11902/1005.4537.2015.078      或      https://www.jcscp.org/CN/Y2016/V36/I2/130

图1  SiCp-Ni/Al和SiCp/Al复合材料的SEM像
图3  SiCp-Ni/Al和SiCp/Al复合材料的XRD谱
图2  SiCp-Ni/Al 复合材料的EDS结果
图4  SiCp-Ni/Al与SiCp/Al复合材料在3.5%NaCl溶液中的极化曲线
Parameter bamVdec-1 bcmVdec-1 EcorrmV IcorrAcm-² Rp
Nickel modified 73.30 12.23 -716.78 -1.07×10-7 42.50
Non-modified 67.04 30.19 -742.39 -7.26×10-6 1.24
表1  SiCp-Ni/Al与SiCp/Al复合材料在3.5%NaCl溶液中的极化曲线的电化学参数
图5  SiCp/Al在3.5%NaCl溶液中浸泡不同时间后的电位电流噪声时域谱
图6  SiCp-Ni/Al在3.5%NaCl溶液中浸泡不同时间后的电位电流噪声时域谱
图7  SiCp-Ni/Al及SiCp/Al在3.5%NaCl中的电化学噪声信号的功率谱密度曲线
图8  点蚀指标随浸泡时间的变化曲线
图9  噪声电阻随浸泡时间的变化曲线
[1] Wang W M, Pan F S, Zeng S M, et al.Current status of development and application in SiCp/Al composites[J]. Ordnance Mater. Sci. Eng., 2004, 27(3): 61
[1] (王文明, 潘复生, 曾苏明等. 碳化硅颗粒增强铝基复合材料开发与应用的研究现状[J]. 兵器材料科学与工程, 2004, 27(3): 61)
[2] Xue W B, Wu X L, Shi X L, et al.Microstructure and corrosion resistance of microarc oxidation film on SiCp/ 2024 aluminum matrix composite[J]. Acta Materiae Compos. Sin., 2006, 23(6): 98
[2] (薛文斌, 吴晓玲, 施修龄等. SiCp/Al铝基复合材料表面微弧氧化膜组织机构及其耐蚀性[J]. 复合材料学报, 2006, 23(6): 98)
[3] Kang M, Cheng X Q, Zhang J K, et al.Tensile, compressive and flexible properties of high volume fraction SiCp/Al composites[J]. Acta Materiae Compos. Sin., 2008, 25(3): 127
[3] (康蒙, 程小全, 张纪奎等. 高体积分数SiCp/Al复合材料的拉伸、压缩与弯曲特性[J]. 复合材料学报, 2008, 25(3): 127)
[4] Zhu M J, Li S, Zhao X, et al.Laser-weldable SiCp-SiCp/Al hybrid composites with bilayer structrue for electronic packaging[J]. Trans. Nonferrous Met. Soc. China, 2014, 24(4): 1032
[5] Hao Y K, Tang B B.Study on the corrosion resistance of SiCp/Al composites[J]. J. Solid Rocket Technol., 1993, (4): 74
[5] (郝元恺, 唐斌斌. 碳化硅/铝基复合材料的耐环境腐蚀性能研究[J]. 固体火箭技术, 1993, (4): 74)
[6] Zhang G D.Interface of metal matrix composites[J]. Chin. J. Mater. Res., 1997, 11(6): 649
[6] (张国定. 金属基复合材料界面问题[J]. 材料研究学报, 1997, 11(6): 649)
[7] Vidal-Sc'tif M H, Lancin M, Marhic C, et al. On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites[J]. Mater. Sci. Eng., 1999, A272: 321
[8] Wang C Y, Wu G H, Zhang Q, et al.Corrosion and protection of aluminum matrix composites[J]. J. Chin. Soc. Corros. Prot., 2008, 28(1): 59
[8] (王春雨, 武高辉, 张强等. 铝基复合材料的腐蚀与防护现状[J]. 中国腐蚀与防护学报, 2008, 28(1): 59)
[9] Zhang B W, Xie H W.Investigation of the amorphous formation ability of Ni-Si-Cu-P alloy deposits prepared by chemical reduction[J]. Rare Met. Mater. Eng., 1998, 27(2): 79
[9] (张邦维, 谢浩文. 化学镀制备Ni-Si-Cu-P合金非晶形成能力[J].稀有金属材料与工程, 1998, 27(2): 79)
[10] Liu X K, Xiang Y H, Hu W B, et al.Adhesion mechanism of direct electroless nickel coating magnesium alloys[J]. J. Chin. Soc.Corros. Prot., 2002, 22(4): 233
[10] (刘新宽, 向阳辉, 胡文彬等. 镁合金化学镀镍层的结合机理[J].中国腐蚀与防护学报, 2002, 22(4): 233)
[11] Osorio W R, Peixoto L C, Cante M V, et al.Microstructure features affecting mechanical properties and corrosion behavior of a hypoeutectic Al-Ni alloy[J]. Mater. Des., 2010, 31: 4485
[12] Karakulak E, Yamanoglu R, Erten U, et al.Investigation of corrosion and mechanical properties of Al-Cu-SiC-xNi composite alloys[J]. Mater. Des., 2014, 59: 33
[13] Yu Y W.The influence of the surface modification of SiCp on the interface and thermal conductivity of SiCp/Al composites [D]. Nanchang: Nanchang Hangkong University, 2014
[13] (俞应炜. SiCp表面改性及其Al基复合材料界面和宏观热导率研究 [D]. 南昌: 南昌航空大学, 2014)
[14] Wang H B, Han J C, Zhang X H, et al.Reaction mechanism of continually heating Ni and Al particles[J]. Acta Metall. Sin., 1998, 34(9): 992
[14] (王华彬, 韩杰才, 张幸红等. Ni-Al粉连续加热过程中的反应机理[J]. 金属学报, 1998, 34(9): 992)
[15] Chrifi-Alaoui F Z, Nassik M, Mahdouk K, et al. Enthalpies of formation of the Al-Ni intermetallic compounds[J]. J. Alloys Compd.,2004, 364: 121
[1] 黄鹏, 高荣杰, 刘文斌, 尹续保. 盐溶液刻蚀-氟化处理制备X65管线钢镀镍超双疏表面及其耐蚀性研究[J]. 中国腐蚀与防护学报, 2021, 41(1): 96-100.
[2] 包任, 周根树, 李宏伟. 恒电位脉冲电沉积高锡青铜耐蚀镀层工艺研究[J]. 中国腐蚀与防护学报, 2020, 40(6): 585-591.
[3] 刘海霞, 黄峰, 袁玮, 胡骞, 刘静. 690 MPa级高强贝氏体钢在模拟乡村大气中的腐蚀行为[J]. 中国腐蚀与防护学报, 2020, 40(5): 416-424.
[4] 李聪玮, 杜双明, 曾志琳, 刘二勇, 王飞虎, 马付良. 电流密度对Ni-Co-B镀层微观结构及磨蚀性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(5): 439-447.
[5] 曹京宜, 方志刚, 陈晋辉, 陈志雄, 殷文昌, 杨延格, 张伟. 5083铝合金表面单致密微弧氧化膜的制备及其性能研究[J]. 中国腐蚀与防护学报, 2020, 40(3): 251-258.
[6] 贾巧燕, 王贝, 王赟, 张雷, 王清, 姚海元, 李清平, 路民旭. X65管线钢在油水两相界面处的CO2腐蚀行为研究[J]. 中国腐蚀与防护学报, 2020, 40(3): 230-236.
[7] 王英君, 刘洪雷, 王国军, 董凯辉, 宋影伟, 倪丁瑞. 新型高强稀土Al-Zn-Mg-Cu-Sc铝合金的阳极氧化及其抗腐蚀性能研究[J]. 中国腐蚀与防护学报, 2020, 40(2): 131-138.
[8] 王乐,易丹青,刘会群,蒋龙,冯春. Ru对Ti-6Al-4V合金腐蚀行为的影响及机理研究[J]. 中国腐蚀与防护学报, 2020, 40(1): 25-30.
[9] 师超,邵亚薇,熊义,刘光明,俞跃龙,杨志广,许传钦. 硅烷偶联剂改性磷酸锌对环氧涂层防腐性能的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 38-44.
[10] 武栋才,韩培德. 中温时效处理对SAF2304双相不锈钢耐蚀性的影响[J]. 中国腐蚀与防护学报, 2020, 40(1): 51-56.
[11] 朱泽洁,张勤号,刘盼,张鉴清,曹发和. 微型电化学传感器在界面微区pH值监测中的应用[J]. 中国腐蚀与防护学报, 2019, 39(5): 367-374.
[12] 孙晓光,韩晓辉,张星爽,张志毅,李刚卿,董超芳. 超低碳奥氏体不锈钢焊接接头耐腐蚀性及环保型化学钝化工艺研究[J]. 中国腐蚀与防护学报, 2019, 39(4): 345-352.
[13] 程多云,赵晋斌,刘波,姜城,付小倩,程学群. 高镍钢和传统耐候钢在马尔代夫严酷海洋大气环境中的腐蚀行为研究[J]. 中国腐蚀与防护学报, 2019, 39(1): 29-35.
[14] 蓝秀玲,刘光明,周街胜,刘志雷,彭叔森,李茂东. 有机硅/SiO2杂化溶胶改性丙烯酸树脂及性能研究[J]. 中国腐蚀与防护学报, 2018, 38(6): 601-606.
[15] 王志虎, 张菊梅, 白力静, 张国君. AZ91镁合金表面微弧氧化与化学镀铜复合处理层的微观组织与性能[J]. 中国腐蚀与防护学报, 2018, 38(4): 391-396.